The Settings Module allows you to review and change the date and time, network connection settings, user interface configurations, and printer settings.
Date - display only, cannot change the date
Time - change the time of day, if required and status of Daylight Savings Time
Time Zone - select the time zone for the printer location
Network Name
Network Adapter Name
MAC Address
Network Status
IP Address is assigned automatically (See DHCP note)
IP Address
Subnet Mask
Default Gateway
[HTTPS proxy]
[HTTPS proxy authentication]
NOTE
A network name for the printer cannot consist of numeric characters only - it must be a mix of alpha-numeric characters. If the Printer name is changed, the printer must be restarted for the change to take effect. If any settings require a printer restart, a reminder will be displayed when that settings is selected.
NOTE
Typically, DHCP is used to automatically obtain network settings. If IP is assigned automatically. If you choose NO, then you must set the IP yourself. The only thing you might want to change is the network name of the printer. The settings are displayed to troubleshoot possible network connection problems. One situation that would require changes is if your network does not use DHCP to automatically obtain network settings. In this case network settings have to be entered manually. If you don't know how to do this, bring in a network consultant to determine what the setting must be for the network (alternately, you can purchase a DHCP router for your network that will automatically supply the network settings - most modern modems use DHCP).
Settings Available
The user interface allows you to change the following features:
Language
Measurement Units
Date format
Time format
Display job/time
Tie lamp controls together
Hold on active
Job delete confirmation
Screen saver
Screen saver timeout
Monitor power off timeout
Allows you to set the following:
General Settings
Underlay thickness
Table vacuum timeout
Ionizer bar (static suppression - On or Off)
Beep on Print
Media registration pin behavior (see Media Registration)
Print Settings
End of Swath Delay
Full carriage travel
Blank Space Skipping
Custom gantry park position
Dual origin mode start position
Weekly Maintenance
Weekly Maintenance Day
Weekly Maintenance Time
Allows you to set the following:
[Enable connection]
[Remote assistance session timeout (hours)]
[Enable remote assistance]
See Enable the Remote Service connection for more information.