Safety Awareness

Introduction

This section contains two sets of principles that must be followed to assure maximum safety when operating your Arizona 6100 Series printer. The first set uses negative examples to show you things to avoid in order to prevent injury to the operator. The second set of principles illustrates some of the residual risks that are inherent in the operation of the printer. These are situations or physical aspects of the printer that may present a potential danger to the operator, but would compromise the capabilities of the printer if changed. Therefore, they are pointed out as a precaution the operator must be aware of when using the printer.

IMPORTANT

The photos in the following table illustrate situations that must be avoided when operating your printer.

Some of the labels in the pictures may look different on your printer.

Situations and Actions to Avoid

Table 1. How NOT to use the printer
Avoid these Situations For Your Personal Safety
	CAUTION Keep the Table Clear Keep the Table Work Surface Clear. Media for Printing only on the table.
	WARNING Do Not Push the Carriage Do NOT Push the Carriage at anytime, either when stationary or when it is moving.
	WARNING Do NOT push the Gantry Do not push the Gantry at anytime, either when stationary or when it is moving.
	WARNING Avoid Moving Carriage Do NOT place any part of your person near the Carriage/Gantry openings.
	WARNING Hot UV Lamps When the Manual Maintenance Door is Open to perform Manual Maintenance, do NOT touch the UV Curing Lamp assemblies. This can retain heat for a long period of time after turning off.
	WARNING Do Not Touch Lamp Assemblies When the Manual Maintenance Door is Open to perform Manual Maintenance, do NOT touch the UV Curing Lamp assemblies. This can retain heat for a long period of time after turning off.
	WARNING Shear Hazard Closing Maintenance Door Be careful not to catch your fingers in the shear when closing the Manual Maintenance Door..
	WARNING UV and Ink Mist Hazard Print Height Warning: Do NOT initiate a print with excessive Print Gap. This causes excessive UV and Ink Mist Emissions.
	WARNING Keep Away from Cable Track Do NOT place any portion of your hand or arm in the Cable Track.
	WARNING Avoid Lamp and Carriage Bumper Do NOT reach or place your hand or fingers between the UV Curing Lamp head and Carriage Collision Bumper.
	WARNING Keep Hands Away When Printing Do NOT reach under the machine when printing. Be careful to avoid the sharp edges of the Gantry Drive belts located at both sides of the machine.
	WARNING Avoid Gantry Drive Belts Do NOT reach under the machine when printing. Be careful to avoid the sharp edges of the Gantry Drive belts located at both sides of the machine.
	WARNING Avoid Gantry Pinch Points Do NOT reach under the machine when printing. Be careful to avoid the pinch points of the Gantry Drive and end plates located at all four corners of the machine.
	WARNING Avoid AMS Cover Do NOT touch the Auto Maintenance Station cover
	WARNING Avoid AMS Cover Do NOT touch the Auto Maintenance Station cover at either end.
	WARNING Hands Off Gantry End Plates Do NOT place your hands near the gantry end plates
	WARNING Hands Off Gantry End Plates Do NOT place your hands near the gantry end plates at either end.
	WARNING Avoid Gantry Beam - Crush Hazard Do NOT reach under the Gantry Beams for any reason.
	WARNING Pinch Hazard Do NOT place your fingers in the locations shown. Pinch Hazard.
	WARNING Pinch Hazard Do NOT place your fingers in the locations shown. Pinch Hazard.
	WARNING Heat Hazard Do NOT reach under the Table Vacuum Pumps. Thermal Hazard present, hot surfaces can burn.
	WARNING High Risk Crush Hazard. Do NOT place your hands or fingers under the Gantry rails anywhere around the machine.
	WARNING High Risk Crush Hazard. Do NOT place your hands or fingers under the Gantry rails anywhere around the machine.
	WARNING High Risk Crush Hazard. Do NOT place your hands or fingers under the Gantry rails anywhere around the machine
	WARNING High Risk Crush Hazard. Do NOT place your hands or fingers under the Gantry rails anywhere around the machine.
	WARNING Cable Track Entanglement Hazard. Do NOT place your hand on the Gantry Beam in this location.
	WARNING Avoid Sharp Edges Do NOT reach over the Gantry Beams into the Print Head Area. Avoid contact with the steel drive belt. Edges are sharp.
	WARNING Crush Hazard Do NOT reach over the Gantry Beams into the Print Head Area. Avoid reaching under the Gantry Beams for any reason.
	WARNING Crush Hazard Do NOT reach over the Gantry Beams into the Print Head Area. Avoid reaching under Carriage Collision Bumper.
	WARNING Shear Hazard Do NOT reach over the Gantry Beams or into the Print Head Area.
	WARNING Pinch Hazard Do NOT place your hands or any other body part on the Gantry Beams.
	WARNING Cable Track Entanglement Hazard Do NOT place your hand on E-Box at this location.
	WARNING Shock Hazard Do NOT operate the machine without a second Bonding connection. Machine is a high leakage device. Shock Hazard may be generated if power connection is removed unexpectedly.
. .	WARNING Remove Obstacles Do NOT operate the machine with any obstacles in the suggested work area.
. .	WARNING Avoid Obstacles Do NOT operate the machine with any obstacle in the suggested work area.

Residual Safety Risks

Your Arizona printer is engineered to minimize machine components and operating procedures that may compromise operator safety. However, in order to maintain some machine operations and functionality, certain compromises are required. The following table documents some of these residual hazards. By making the operator aware of the potential risks, we hope to ensure maximum safety in the operation of this printer.

Caution: there may be a time lag between when a print job is issued and when the gantry movement actually begins as the UV lamps must warm up first. Movement can start many minutes after a print job is sent.

Table 2. Arizona Printer Residual Risks
Residual Risk Area	Hazard
WARNING Ink Mist Hazard Carriage Height can be excessive. This causes excessive UV and Ink Mist Emissions.
WARNING Avoid Moving Carriage Carriage moves rapidly and can cause injury. The Emergency Stop at the User Podium and Red and Yellow Long Sense Edges on the Gantry Beams will arrest this motion.
WARNING High Risk crush/Pinch Hazard A high risk crushing/pinch hazard is created by the table and the gantry. Gantry Z-Axis motion can cause injury if body parts become trapped. The Emergency Stop at the User Podium and Red and Yellow Long Sense Edges on the Gantry Beams will arrest this motion.
WARNING Gantry Movement Hazard The Gantry moves slowly at most times, but can move quickly at unexpected times. This has a lot of mass and can knock a person over. The Emergency Stop at the User Podium and Red and Yellow Long Sense Edges on the Gantry Beams will arrest this motion.
WARNING Carriage Vertical Movement Pinch Hazard High Risk crush hazards are created by allowing operator direct access to the vertical downward force of the carriage. The Emergency Stop at the User Podium and Red and Yellow Long Sense Edges on the Gantry Beams will arrest this motion.
WARNING High Risk Crush Hazard High Risk crush hazards are created by allowing the operator direct access to the vertical downward force of the carriage when it is at its highest position and printing. The Emergency Stop at the User Podium and Red and Yellow Long Sense Edges on the Gantry Beams will arrest this motion.
WARNING High Risk Crush and Thermal Hazard High Risk Crush Hazards and Thermal Hazards are created by allowing operator direct access to the carriage when the center maintenance panel is lowered. Motion Motors are disconnected via hardware when this panel is lowered.
WARNING Crush Hazard Medium risk crushing hazards are created by alignment pins and the gantry rails.

Advanced search

Safety Awareness

Introduction

Situations and Actions to Avoid

Residual Safety Risks