Information about positioning copies of the application on the media in the [Media layout] tab

[Media size] 

Select a media size available for your printer model.

[Width / height] 

This setting is only available when you have selected [Media size] - [Custom].

Otherwise the [Width / height] is filled in automatically.

[Job width / height] 

Calculated value. Cannot be changed.

[Horizontal / vertical offset] 

Enter the horizontal and the vertical offset if you want to position a single copy of your job on a bigger media.

[Rotation] 

Enter the rotation of your job in degrees (0, 90, 180, 270).

When you have ticked the checkbox [Fill panel], you can select [Auto]. The software then attempts to rotate all the copies 90 degrees to see if it can fit more copies on a panel.

[Step and repeat] 

Tick this checkbox to enable step and repeat.

[Panels] 

Enter a specific number of copies or tick [Fill panel] to let the software compute how many copies can be fitted on the selected media size, using all the other specified settings.

[Horizontal / vertical margin] 

Enter the horizontal and the vertical margin for the set of jobs.

[Horizontal / vertical interleaved offset] 

Enter the horizontal and the vertical interleaved offset for the jobs.

These settings, together with horizontal and vertical spacing can be useful to define tighter layouts. It works best for non-rectangular shapes - i.e. circles/ellipses.

[Horizontal / vertical spacing] 

Enter the horizontal and the vertical spacing between the jobs.

[Order] 

[Left-right] 

[Bottom-top]