To make sure your artwork is printed correctly, it is important that the media that you want to print on is aligned precisely on the table of your Arizona printer.
For registration purposes you can use one of the following layers as a registration layer.
One of the printable layers.
The cut layer that is generated automatically when your recipe also uses "cutting".
When you want to create an artwork that needs to be printed both on the front side and on the back side of the media, you have two options.
When your artwork is symmetrical you need to print the information in the registration layer only once. That is, because you can use the same printed output to align both the front side and the back side of the media.
When your artwork is not symmetrical, like in the example below, you need to print both the information in the front registration layer and the information in the back registration layer . That is, because you will need the printed output of the front registration layer to align the front side of your artwork and the printed output of the back registration layer to align the back side of your artwork.
|
Settings category |
Setting |
Description |
|---|---|---|
|
[Position] |
[Front] |
When you don't tick this checkbox, the [Front] settings category will be greyed out. |
|
[Back] |
When you don't tick this checkbox, the [Back] settings category will be greyed out. |
|
|
[Front] |
[Registration layer] |
Select the layer that contains the registration information. |
|
[Type] |
Select the type of information in the registration layer that you want to use for registration ([Image] or [Rectangle] ). [Image] is particularly useful for clear media or for non-rectangular precut jobs where the cut path/registration information is not available in the PDF file. [Rectangle] is typically useful for [Print, Cut] or for opaque rectangle jobs. |
|
|
[Flip horizontal] |
Tick this option when you want the registration information to be flipped horizontally. |
|
|
[Flip vertical] |
Tick this option when you want the registration information to be flipped vertically. |
|
|
[Media] |
Select the media profile in ONYX Thrive that contains the print mode that you want to use to print the registration layer. |
|
|
[Print mode] |
Select the print mode that you want to use to print the registration information. Normally, this will be the [Express] print mode, because it is not necessary to print the registration information in a high quality print mode. |
|
|
[Download front registration] |
Click on the button [Download front registration] to download a registration PDF. Based on the registration PDF you can manufacture a jig. |
|
|
[Back] |
[Registration layer] |
Select the layer that contains the registration information. |
|
[Type] |
Select the type of information in the registration layer that you want to use for registration ([Image] or [Rectangle] ). [Image] is particularly useful for clear media or for non-rectangular precut jobs where the cut path/registration information is not available in the PDF file. [Rectangle] is typically useful for [Print, Cut] or for opaque rectangle jobs. |
|
|
[Flip horizontal] |
Tick this option when you want the registration information to be flipped horizontally. |
|
|
[Flip vertical] |
Tick this option when you want the registration information to be flipped vertically. |
|
|
[Media] |
Select the media profile in ONYX Thrive that contains the print mode that you want to use to print the registration layer. |
|
|
[Print mode] |
Select the print mode that you want to use to print the registration information. Normally, this will be the [Express] print mode, because it is not necessary to print the registration information in a high quality print mode. |
|
|
[Download back registration] |
Click on the button [Download back registration] to download a registration PDF. Based on the registration PDF you can manufacture a jig. |