According to 2006/42/EC a document setting out the contents of the CE Declaration of Conformity is included in this User Documentation.
Warning: This equipment is compliant with Class A. In a residential environment this equipment may cause radio interference.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the User Documentation, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the User Documentation. If you make such changes or modifications, you could be required to stop operation of the equipment.
This equipment contains a certified modular transmitter. The transmitter’s FCC ID label is located near the power rating label. The modular transmitter is located in the ink supply unit and can only be accessed by a service technician.
CAN ICES-3 (A)/NMB-3(A)
This end device contains an RFID module which is already approved by MIC (AC-17014) for Radio Law.
This equipment contains a certified modular transmitter. The transmitter’s FCC ID label is located near the mains power outlet. The modular transmitter is located in Ink bay and can only be accessed by a service technician.
This equipment contains a certified modular transmitter. The transmitter’s FCC ID is U2P-3010120604 , the IC ID is 6947A-3010120604 .
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Centre for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation. The related label indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this User Documentation may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 0.5 mW.
This product may contain lamps that are only intended for use in combination with and for this specific product (and related equipment) and such lamps are not intended for use in other applications.
This product contains a battery. Please do not remove the battery. If the battery needs replacement, this should be done only by skilled service technicians who are aware of the removal instructions provided by Canon.
This product contains a battery or batteries. It (They) is (are) located in (a) printed circuit board(s) that is (are) essential for the continuous error-free functioning of the product. The battery or batteries should be removed only by skilled service technicians who are aware of the removal instructions provided by Canon.
|
Location |
Battery capacity |
Contains |
|---|---|---|
|
Internal controller |
200 mAh |
Lithium type |
Caution: Canon does not accept any liability for any damage or consequences, if the batteries are removed by persons other than Canon service personnel.
This product contains a Lithium battery, containing Perchlorate Material – special handling may apply, see http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
Translation: Waste batteries, please recycle.
This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit http://www.canon-europe.com/environment. Reference: Directive 2012/19/EU.
This product is not to be disposed of with your household waste, according to the E-Waste (Management) Rules, 2016. This product should be handed over to a designated collection point, e.g., to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information regarding return and recycling of WEEE products, please visit http://www.canon.co.in/environment or write to us at customer.delight@canon.co.in. Also, this product complies with the "E-Waste (Management) Rules, 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 % by weight and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule II of the Rule.
Translation: Handling of disposals. Used consumables and expendables must be discarded by the customer as industrial waste in accordance with the laws as well the regulations of local government.
The Environmental Protection Use Period (EPUP) applicable for the machine designated for deliveries to the Peoples Republic of China is 20 years. This EPUP, which does not include consumables or expendables, does not affect any warranty that is provided for the system and may not be construed or interpreted as a separate guarantee for the machine.
Canon brand products sold in Vietnam market comply with following Circular and Decision - "Circular No.30/1011/TT-BCT dated August 10, 2011 of the Ministry of Industry and Trade stipulating temporarily the permissible content limitation of some toxic chemicals in the electronic, electrical products" - Decision No.4693/QD-BCT correcting Circular 30/2011/TT-BCT.
For the statement on Canon Marketing Vietnam website, please see the last paragraph on the web page of the following URL: http://www.canon.com.vn/personal/web/company/about/.
REACH regulation (EC No 1907/2006) article 33 requires information to be communicated to customers/end users about the presence of SVHC substances included in the REACH candidate list when such substances are above the threshold of 0.1% in articles. If such information has to be communicated it can be found on www.canon-europe.com/about_us/sustainability/business/reach_customer_statement/.
Under normal conditions of use, there will be no exposure and no special measures are required for safe use.
The energy consumption of Imaging Equipment can be determined by means of the TEC-procedure. This procedure was developed under the responsibility of the United States Environmental Protection Agency. TEC stands for Typical Electricity Consumption. The TEC-value of a product represents the energy consumed in a week under standardized conditions. For the Arizona 1300 Series the TEC-value is listed in the Product Safety Data Sheet.
The environmental requirements for correct operation of the machine are as follows:
Operating temperature (T): 18°C (64°F) to 30°C (86°F)
Relative Humidity (RH): 40% to 70%
Operating altitude: below 2000 m
Translation: Can only be safely used lower than 2,000 meters altitude.
Translation: Can only be safely used in non-tropical weather.
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden.
Translation: The equipment is not intended for use within the direct visual field of a workplace equipped with a monitor screen. In order to avoid annoying reflections at the workplace (monitor screen), this product must not be placed within the direct visual field of monitor screens.
Sound pressure (LpA = 71 dB(A)) is used to characterize the sound level that will be experienced at operator position (around the product at a distance of 100 cm (39.4 inch) and a height of 150 cm (59.1 inch)) and is defined as the dynamic variation of the static pressure of air measured in force per unit area. Sound pressure is normally represented in decibels [dB]. Typical values are a sound pressure level of 0 dB, which is the average threshold of human hearing, and 60 to 70 dB for normal conversation, 110 dB at an extremely loud music concert, and 150 dB for the noise of a jet engine at close range.