Configure the working hours

Introduction

You can define the working hours of the printer in Océ Express WebTools.

Enable [Automatic on] first, to let the printer wake up automatically. Define the working days with the [First working day] setting, for example 'Monday', and [Last working day] setting, for example 'Friday'. And set the wake up time and shut down time with the [Start-up time] and [End of working day time] settings, for example '06:30' and '19:00'.

That way the printer turns on and off automatically, at the set day and time.

NOTE

Even if [Automatic on] is disabled, the [End of working day time] setting is active and causes the printer to automatically switch off at the selected time (due to power saving regulations, the printer must always shut down once in twenty-four hours).

NOTE

If the printer was manually powered on outside the defined working hours, the printer will automatically switch off instead of going to sleep mode after the selected [Go into sleep mode after] period has elapsed.

Procedure

Open the [Preferences] - [System defaults] tab.
Click on [Edit] in the [Printer properties] section.
Set the [Automatic on] setting to [Enabled].
Set the [Start-up time], [End of working day time], [First working day] and [Last working day] settings according to your preferences.
Click [Ok] to confirm, or [Cancel] to reject your entries.

Results

The printer now wakes up automatically, and is active during the preferred time frame on the set days.