Access control and IPsec settings

[Access control station 1]

Enable or disable communication of this host with the printer.

[Access control station 1: IPv4 address]

The IPv4 address of the host is allowed to connect to the printer.

This setting is visible if Network-adapter>IP-type is configured for IPv4.

[Access control station 1: IPv6 address]

The IPv6 address of the host is allowed to connect to the printer.

This setting is visible if Network-adapter>IP-type is configured for IPv6.

[IPsec station 1]

Enable or disable IPsec. IPsec is a security protocol that encrypts the communication between the host and the printer.

[IPsec station 1: Preshared key]

The key for encryption of this host connected via IPsec. If empty, the default preshared key is used.

[IPsec default preshared key] 

This is the default key for encryption of hosts connected via IPsec. This key holds for all stations whose preshared key is unspecified.

[IPsec authentication method] 

Select IPSec Authentication type: [Pre-shared key], [Certificate] or [Certificate followed by Pre-shared key].

[Signature algorithm of the IPsec certificate] 

Select the IPSec Signing Algorithm: RSA, ECDSA P256 or ECDSA P384.

This setting is only visible in case IPSec authentication method also uses certificates.

[IPsec certificate type] 

Select Certificate Type: Root or Intermediate.

This setting is only visible in case IPSec authentication method also uses certificates.

[IPsec certificate] 

Not Editable, displays 'Certificate not present' as default or the Certificate common name when present.

This setting is only visible in case IPSec authentication method also uses certificates.