Loading

Access control and IPsec settings

Introduction

When access control is enabled, you can edit the access control settings.

[Access control] and IPsec settings

Under [Security] - [Configuration] - [Access control], you can set the following settings for each of the 5 stations:

Setting

Description

[Access control station 1]

Enable or disable communication of this host with the printer.

[Access control station 1: IPv4 address]

The IPv4 address of the host is allowed to connect to the printer.

[Access control station 1: IPv6 address]

The IPv6 address of the host is allowed to connect to the printer.

[IPsec station 1]

Enable or disable IPsec. IPsec is a security protocol that encrypts the communication between the host and the printer.

[IPsec station 1: Preshared key]

The key for encryption of this host connected via IPsec. If empty, the default preshared key is used.

For IPsec you can set the following settings:

Setting

Description

[IPsec default preshared key]

This is the default key for encryption of hosts connected via IPsec. This key holds for all stations whose preshared key is unspecified.

[IPsec authentication method]

Select IPSec Authentication type: Preshared key, Certificates or both.

[Signature algorithm of the IPsec certificate]

Select the IPSec Signing Algorithm: RSA, ECDSA P256 or ECDSA P384.

[IPsec certificate type]

Select Certificate Type: Root or Intermediate.

[IPsec certificate]

Not Editable, displays 'Certificate not present' as default or the Certificate common name when present.

NOTE

For more details on these settings please consult the manual PlotWave-ColorWave Systems Security .