When access control is enabled, you can edit the access control settings.
Under [Security] - [Configuration] - [Access control], you can set the following settings for each of the 5 stations:
|
Setting |
Description |
|
|---|---|---|
|
[Access control station 1] |
Enable or disable communication of this host with the printer. |
|
|
[Access control station 1: IPv4 address] |
The IPv4 address of the host is allowed to connect to the printer. |
|
|
[Access control station 1: IPv6 address] |
The IPv6 address of the host is allowed to connect to the printer. |
|
|
[IPsec station 1] |
Enable or disable IPsec. IPsec is a security protocol that encrypts the communication between the host and the printer. |
|
|
[IPsec station 1: Preshared key] |
The key for encryption of this host connected via IPsec. If empty, the default preshared key is used. |
|
For IPsec., you can set the following setting:
|
Setting |
Description |
|
|---|---|---|
|
[IPsec default preshared key] |
This is the default key for encryption of hosts connected via IPsec. This key holds for all stations whose preshared key is unspecified. |
|
NOTE
For more details on these settings please consult the Océ PlotWave-ColorWave Systems Security manual.