Loading

Access control and IPsec settings

Introduction

When access control is enabled, you can edit the access control settings.

[Access control] and IPsec settings

Under [Security] - [Configuration] - [Access control], you can set the following settings for each of the 5 stations:

Setting

Description

[Access control station 1]

Enable or disable communication of this host with the printer.

[Access control station 1: IPv4 address]

The IPv4 address of the host allowed to connect to the printer.

[Access control station 1: IPv6 address]

The IPv6 address of the host allowed to connect to the printer.

[IPsec station 1]

Enable or disable IPsec. IPsec is a security protocol that encrypts the communication between the host and the printer.

[IPsec station 1: Preshared key]

The key for encryption of this host connected via IPsec. When empty, the default preshared key is used.

For IPsec. you can set the following setting:

Setting

Description

[IPsec default preshared key]

This is the default key for encryption of hosts connected via IPsec. This key holds for all stations whose preshared key is unspecified.

NOTE

For more details on these settings please consult the Océ PlotWave-ColorWave Systems Security manual.