Loading

Enable Access control

Introduction

When you want to control access to your printer, you need to enable access control in Océ Express WebTools. With access control enabled, you are able to choose up to five hosts who are allowed to communicate with the printer through your network. This amount of hosts allows for flexible configuration.

For each of the hosts you can decide whether the communication from this host to the system needs to be encrypted by IPsec.

Procedure

  1. Open the [Security] - [Configuration] tab.
  2. In the [Access control] section, click on the [Access control] setting.
  3. Change the [Access control] setting from [Disabled] to [Enabled]. The setting is enabled when you check the box.
  4. Click OK to confirm.