Loading

Create an external location

Introduction

You can create your own FTP, SMB, WebDAV, external locations with Océ Express WebTools.

Before you begin

NOTE
  • Make sure you enable [SMB] protocol.

  • Make sure you enable [FTP] under the [Configuration] - [Connectivity] tab.

  • Make sure the URL for [WebDAV] is not blocked.

  • For this procedure, you need to log in as a System administrator.

Procedure

  1. Select the [Configuration] - [External locations] tab.
  2. Click on [Create new] in the upper right hand corner .
  3. Enter a [Name] recognisable for the user. This name appears on the user panel.
  4. Enter a [Description] of the settings used.
  5. Select the [Type] of the external location: [FTP], [SMB], or [WebDAV].
  6. Enter the [Path]. The folder path or URL to the external location.
    • For [FTP], use the syntax: hostname[/path] (example: myhost/mydirectory/scantofile).

    • For [SMB], use the syntax: \\hostname\sharename[\path] (example: \\myhost\myshareddirectory\scantofile).

    • For [WebDAV] locations, use the full HTTP URL (for example: http://example.webdav.org:8080/repository/).

  7. Select under [Credentials] whether or not the user has to log in to access the external location.
    • Select [Prompt the user to log in on the user panel] when you want the user to log in on the user panel.

      Login will appear when the user tries to access the external location on the user panel.

    • Select [Use the following credentials for automatic login:] when you want to configure the credentials here.

      The user is not requested to log in on the user panel when he tries to access the external location.

  8. If you have selected [Use the following credentials for automatic login:] fill in the user name and password.
    • The [User name] gives access to the external location. The user must at least have read and write permissions for the external location. For SMB destinations the format must be as follows: Local user name: 'IPaddress\username' or 'hostname\username'. Domain user name: 'domain\username'.

    • Enter the [Password] that belongs to the user name.

  9. Select the [Enabled functionalities]. Enable or disable access to the selected location for print or scan jobs.
  10. Click [Ok] to save the external location.
    NOTE

    The system will validate the external location, and give an error message when the validation fails.

    In case of an error, you can click 'Save' to save the external location with the error or click 'Change' to change the entries.

Results

The external location can be used via the user panel and in Océ Express WebTools.