Shift the image roughly to create binding space

Introduction

If you want to create space for staples or punch holes, for example, you can use the [Align] function. The preview in the right-hand pane of the control panel displays the consequences of your changes.

The [Align] function allows a rough image shift. You can select one of the following settings:

Table 1. [Align] values
When you select:	Then the image is moved to:
[Top left]	The upper left corner of the sheet.
[Top center]	The upper center of the sheet.
[Top right]	The upper right corner of the sheet.
[Center left]	The left-hand side of the sheet, over the center line.
[Center]	The middle of the sheet.
[Center right]	The right-hand side of the sheet, over the center line.
[Bottom left]	The lower left corner of the sheet.
[Bottom center]	The lower center of the sheet.
[Bottom right]	The lower right corner of the sheet.

NOTE

You cannot change this setting for the active print job .

Procedure

On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a DocBox.
Touch the job you want to change.
Touch [Edit], or double-tap the job to open the [Edit] window.
Touch the [Align] button.
Make the required changes.
Touch [OK].

Advanced search

Shift the image roughly to create binding space

Introduction

Procedure