Loading

Values for the Media Registration

Procedure

Settings front side

What to enter

X elongation (0.01%)

The image is elongated or shrunk in increments of 0.01%.

A value > 0 elongates the image by moving the trailing edge of the image to the right:

  • The length of the image in the feed direction increases.

  • The distance between the leading edge of the sheet and the image on the sheet remains the same.

  • The circles on the right-hand side of the verification chart move to the right (trailing edge).

A value < 0 shrinks the image by moving the trailing edge of the image to the left:

  • The length of the image in the feed direction decreases.

  • The distance between the leading edge of the sheet and the image on the sheet remains the same.

  • The circles on the right-hand side of the verification chart move to the left (leading edge).

Settings back side

What to enter

X elongation (0.01%)

The image is elongated or shrunk in increments of 0.01%.

A value > 0 elongates the image by moving the trailing edge of the image to the right:

  • The length of the image in the feed direction increases.

  • The distance between the leading edge of the sheet and the image on the sheet remains the same.

  • The dots on the right-hand side of the verification chart move to the right (trailing edge).

A value < 0 shrinks the image by moving the trailing edge of the image to the left:

  • The length of the image in the feed direction decreases.

  • The distance between the leading edge of the sheet and the image on the sheet remains the same.

  • The dots on the right-hand side of the verification chart move to the left (leading edge).

Table 1. Ranges

Setting

Range

X elongation (0.01%)

-500 to +500

NOTE

If the elongation is too great, the image can become larger than the sheet. In this case the image is printed over the edges of the sheet.

  • Risk of reprinting.

  • Risk of system pollution.