The group prtAlertGroup consists of the prtAlertTable. Each prtAlertEntry consists of the following supported objects:
prtAlertIndex
prtAlertSeverityLevel
prtAlertTrainingLevel
prtAlertGroup
prtAlertGroupIndex
prtAlertLocation
prtAlertCode
prtAlertDescription
prtAlertTime
The possible alert levels are:
criticalBinaryChangeEvent(3)
warningBinaryChangeEvent(5)
This object returns "Unknown" (-2) will be returned.
|
Case of alert |
(1) |
(2) |
Group |
Index |
Code |
|---|---|---|---|---|---|
|
nth input tray empty (1 <= n <= N) |
W |
U |
Input |
n |
inputMediaSupplyEmpty prtInputName + " is empty" |
|
all input trays empty |
C |
U |
Input |
100 |
inputMediaSupplyEmpty "Out of paper" |
|
nth output tray full (1 <= n <= N) |
W |
U |
Output |
n |
outputMediaTrayFull prtOutputName + " is full" |
|
nth output tray offline (1 <= n <= N) |
W |
U |
Output |
n |
outputMediaTrayMissing prtOutputName + " is offline" |
|
all output trays full |
C |
U |
Output |
100 |
outputMediaTrayFull "Output trays full" |
|
nth waste box full (1 <= n <= N) |
W |
U |
Output |
100 + n |
subunitFull Element at position n in the ocePrtOutputModel list + "waste box is full" |
|
nth waste box absent (1 <= n <= N) |
W |
U |
Output |
100 + n |
subunitMissing Element at position n in the ocePrtOutputModel list + "waste box is absent" |
|
Toner empty (1 <= n <= N) |
C |
U |
Supply |
n |
markerTonerEmpty For 1 marker products: "Out of toner" Other products: prtMarkerSuppliesDescription + “: Out of toner” |
|
Toner low (1 <= n <= N) |
W |
U |
Supply |
n |
markerTonerAlmostEmpty For 1 marker products: "Almost out of toner" Other products: prtMarkerSuppliesDescription + “: Almost out of toner” |
|
Waste Toner Full |
W |
Y |
General printer |
1 |
subunitFull “Waste toner is full” |
|
1st Stapler low ocePrtOutputModel index: (1 <= n <= N) |
W |
U |
Supply |
100 + n |
subunitAlmostEmpty Element at position n in the ocePrtOutputModel+ "Stapler 1 is almost empty" |
|
2nd Stapler low ocePrtOutputModel index: (1 <= n <= N) |
W |
U |
Supply |
200 + n |
subunitAlmostEmpty Element at position n in the ocePrtOutputModel+ "Stapler 2 is almost empty" |
|
1st Stapler empty ocePrtOutputModel index: (1 <= n <= N) |
W |
U |
Supply |
100 + n |
subunitEmpty Element at position n in the ocePrtOutputModel+ "Stapler 1 is empty" |
|
2nd Stapler empty ocePrtOutputModel index: (1 <= n <= N) |
W |
U |
Supply |
200 + n |
subunitEmpty Element at position n in the ocePrtOutputModel+ "Stapler 2 is empty" |
|
Perfect Binder glue empty (1 <= n <= N) |
W |
U |
Supply |
1000 + n |
Element at position n in the ocePrtOutputModel list + "glue is empty" |
|
Perfect Binder glue low (1 <= n <= N) |
W |
U |
Supply |
1000 + n |
Element at position n in the ocePrtOutputModel list + "glue is almost empty" |
|
Perfect Binder glue warming up (1 <= n <= N) |
W |
U |
Supply |
1000 + n |
Element at position n in the ocePrtOutputModel list + "glue is warming up" |
|
Paper Jam |
C |
U |
Other |
2 |
jammed "Operator Recoverable Error: Paper jam" |
|
Printer cover/door opened (ORE) |
C |
U |
Other |
3 |
Cover open "Operator Recoverable Error: Cover open" |
|
Engine Off |
C |
U |
General printer |
1 |
PowerDown "Engine Off: Switch on engine." |
|
MRE |
C |
U |
General printer |
1 |
subunitRecoverableFailure "MRE: Switch on engine" |
|
Fatal Error (MRE 11504) |
C |
U |
General printer |
1 |
subunitUnrecoverableFailure "Fatal Error: Switch the safety switch off and on again." |
|
Permanent Error |
C |
S |
General printer |
1 |
subunitUnrecoverableFailure "Permanent error: Call service" |
|
Operator intervention required |
C |
U |
General printer |
1 |
other "Operator intervention required" This alert is set when a critical alert is reported. |
Legenda:
(1) = Severity level
(2) = Training level
W = warning
C = Critical
U = Untrained
S = Service
For all these alerts, details are available on the console.