|
[Finishing]
|
You can overrule the defined finishing settings in the document, without losing the original finishing settings.
-
[As in document]
Print the document with the original finishing settings.
-
[No finishing]
Print the document without any finishing settings.
-
[Corner staple]
Print the document with 1 staple in the corner, but without any fold and punch settings.
-
[1 Edge staple]
Print the document with 1 staple, but without any fold and punch settings.
-
[2 Edge staples]
Print the document with 2 staples, but without any fold and punch settings.
-
[Near-line finishing]
The available finishing flows become available. The [Print] button becomes a [Print & finish] button.
-
Select which finishing flow must be used for the print job.
-
Optionally, you can select to print a banner page. The banner page contains a barcode to identify the printed job. You have to select the encoding for the barcode.
For example, you make a test print with option [1 Edge staple]. The document is printed with 1 staple, but without any fold and punch settings. Then you select option [As in document] and print again. The document is printed with the original finishing settings as defined in the application.
|
|
[Feed edge]
|
The paper can be fed into the printer with the long edge or the short edge. This depends how the paper is loaded in the paper tray.
-
[Printer default]
Use paper from the default paper tray of the printer.
-
[Short edge]
Use paper from a paper tray where the [Feed edge] is [Short edge].
-
[Long edge]
Use paper from a paper tray where the [Feed edge] is [Long edge].
|
|
[Trimming mode]
|
-
[Off]
-
[From]
Only the front edge of the page is cut. Use the [Finishing size] option to define the page size after trimming. The drop-down list contains predefined page sizes, e.g. A4. Or you can select the [Custom] value to define the width of the page yourself.
-
[Front, top, bottom]
The front edge and the top and bottom of the page are cut. Use the [Finishing size] option to define the page size after trimming. The drop-down list contains predefined page sizes, e.g. A4. Or you can select the [Custom] value to define the width and the height of the page yourself. You can also define the [Bottom offset].
|
|
[Saddle press]
|
Enable the [Saddle press] option to apply mechanical pressure to a folded document. The result is a tightly folded document.
Use the [Adjustment] option to increase or decrease the mechanical pressure.
 NOTE
Check if your finisher supports this option.
|
