The machine has 2 toner reservoirs. The toner reservoirs are located at the left-hand side and the right-hand side of the engine module Introduction to the main system components. You can check the status of the toner reservoirs in the dashboard The dashboard and in the [System] view. The [System] view also displays the current filling level of each toner reservoir as a percentage. The icons in the following table indicate the status of the toner reservoirs.
This section gives an overview of the possible toner statuses. Furthermore, this section describes how to check the status.
|
Toner icon |
Description |
|---|---|
|
The toner icon is blue. All 3 blocks of the status bar are green. The toner reservoir is filled over 75%. Do not add toner. |
|
The toner icon is blue. 2 Blocks of the status bar are green. The toner reservoir is filled over 50%. You can add 1 bottle of toner. |
|
The toner icon is blue. 1 Block of the status bar is green. The toner reservoir is filled over 25%. You can add 2 bottles of toner. |
|
The toner icon is orange. The status bar contains no more green blocks. The toner reservoir is filled less than 25%. The printer can print another 600 sheets. You must add up to 3 toner bottles as soon as possible. |
|
The toner icon is red. The status bar has a red frame. The toner reservoir is empty. The printing stops. You must add maximum 3 toner bottles to continue the printing. |
|
The toner icon is greyed out. The status of the toner reservoir is unknown. This status is only displayed when the system is initialising. |
|
The toner icon is greyed out and has a blue dotted frame. The status bar is greyed out and has a red dotted frame. The status of the toner reservoir is unknown. This status is only displayed when the toner access cover is open. |
NOTE
Follow the steps 2 and 3 to view the status of the toner reservoirs as a percentage.
The [System] view displays the current filling level of the toner reservoirs as a percentage. The percentage matches the blocks that are indicated in the dashboard.