Introduction to the main system components

1

Control panel

The control panel helps you with your daily work, for example the scheduling of the jobs. Furthermore, the control panel helps you to solve errors or perform maintenance tasks (see Control panel).

2

Operator attention light

The operator attention light enables you to check the status of the system from a distance (see The operator attention light).

3

Paper module

The paper module contains 4 paper trays. The paper trays contain the media that will be printed. The default configuration of the system contains 1 paper module. You can add 1 or 2 more paper modules to the default configuration to increase the media input capacity (see The paper modules).

4

Engine module

The engine module contains the components that print the media. Access to the engine module is only required when a paper jam occurs or when maintenance is required. The doors at the left-hand side and right-hand side of the engine module give access to the toner units.

5

Stacker

The stacker is the output location of a default configuration. The system supports up to 3 stackers (see The output locations).

6

Finisher (optional)

The finisher on top of the stacker is an optional output location for the print jobs. The finisher can staple the jobs (see The output locations).

7

Roll feeder (optional)

A roll feeder is an optional device that adds paper input capacity to your printer. When you use a roll feeder, you can only use 1 or 2 paper modules. A combination of 3 paper modules and a roll feeder is not possible. The control panel displays the roll feeder and gives feedback about the status of the roll feeder. For example whether the roll is full or empty. Please refer to the documentation of the roll feeder manufacturer for more information, for example about replacing an empty roll.