The following table shows the PCL Input Tray IDs that are supported by the imagePRESS C10000VP Series. The input tray mapping can be changed via the Settings Editor.
For example, use command <Esc>&l4H to select input tray 3.
|
PCL Tray ID <Esc>&l#H |
Input tray |
|---|---|
|
1 |
Paper module 1, tray 1 |
|
2 |
Paper module 1, tray 2 |
|
4 |
Paper module 1, tray 3 |
|
8 |
Paper module 1, tray 4 |
|
20 |
Paper module 2, tray 1 |
|
21 |
Paper module 2, tray 2 |
|
22 |
Paper module 2, tray 3 |
|
23 |
Paper module 2, tray 4 |
|
301 |
Inserter, tray 1 |
|
302 |
Inserter, tray 2 |
|
PCL Tray ID <Esc>&l#H |
Input tray |
|---|---|
|
1 |
Tray 1 |
|
2 |
Tray 2 |
|
4 |
Tray 3 |
|
8 |
Tray 4 |
|
20 |
Tray 5 |
|
21 |
Tray 6 |
|
22 |
Tray 7  NOTE
Not available for the imagePRESS C800 / C850 Series |
|
23 |
Tray 8 NOTE
Not available for the imagePRESS C800 / C850 Series |
|
28 |
Special feeder |
|
301 |
|
|
302 |
|
The following table shows PCL Outputbin IDs that are supported to select the output destination.
For example, use command <Esc>&l1G to select the stacker top tray.
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray2 |
|
5 |
STACKER2_BULK |
Left-hand stacker stack tray2 |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
7 |
TOP2_TRAY |
Left-hand stacker top tray |
|
8 |
BOOKLETMAKER |
Stacker/stapler booklet tray |
|
9 |
FOLDER |
Folder main tray |
|
10 |
STACKER3_BULK |
Stacker stack tray1 |
|
11 |
STACKER4_BULK |
Left-hand stacker stack tray1 |
|
101 |
EXTERNAL |
External finisher |
The imagePRESS C800 / C850 Series support:
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
8 |
BOOKLETMAKER |
Stacker/stapler booklet tray |
|
9 |
FOLDER |
Folder main tray |
|
101 |
EXTERNAL |
External finisher |
The imagePRESS C10000VP Series supports:
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray |
|
5 |
STACKER2_BULK |
Left-hand stacker stack tray |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
7 |
TOP2_TRAY |
Left-hand stacker top tray |
|
8 |
BOOKLETMAKER |
Stacker/stapler booklet tray |
|
9 |
FOLDER |
Folder main tray |
|
101 |
EXTERNAL |
External finisher |
The imagePRESS C7011VPS Series supports:
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray |
|
5 |
STACKER2_BULK |
Stacker 2 stack tray |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
7 |
TOP2_TRAY |
Stacker 2 top tray |
|
8 |
BOOKLETMAKER |
Stacker/Stapler booklet tray |
|
101 |
EXTERNAL |
External finisher |