The following table shows the PCL paper tray IDs that are supported by the Océ VarioPrint 6000 Series. The paper tray mapping can be changed via the Settings Editor.
For example, use command <Esc>&l4H to select paper tray 3.
|
PCL Tray ID <Esc>&l#H |
Paper tray |
|---|---|
|
1 |
Paper module 1, paper tray 1 |
|
2 |
Paper module 1, paper tray 2 |
|
4 |
Paper module 1, paper tray 3 |
|
8 |
Paper module 1, paper tray 4 |
|
20 |
Paper module 2, paper tray 1 |
|
21 |
Paper module 2, paper tray 2 |
|
22 |
Paper module 2, paper tray 3 |
|
23 |
Paper module 2, paper tray 4 |
|
24 |
Paper module 3, paper tray 1 |
|
25 |
Paper module 3, paper tray 2 |
|
26 |
Paper module 3, paper tray 3 |
|
27 |
Paper module 3, paper tray 4 |
|
99 |
Roll feeder |
The following table shows the PCL output tray IDs that are supported to select the output destination.
For example, use command <Esc>&l1G to select the stacker top tray.
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Finisher upper output |
|
2 |
STAPLER_LOWER | LOWER |
Finisher main output |
|
4 |
STACKER1_BULK |
Stacker |
|
5 |
STACKER2_BULK |
Stacker 2 |
|
10 |
STACKER3_BULK |
Stacker 3 |
|
101 |
EXTERNAL |
External finisher |