The following table shows the PCL paper tray IDs that are supported by the imagePRESS C910 Series. The paper tray mapping can be changed via the Settings Editor.
For example, use command <Esc>&l4H to select paper tray 3.
|
PCL Tray ID <Esc>&l#H |
Input tray |
|---|---|
|
1 |
Paper tray 1 |
|
2 |
Paper tray 2 |
|
4 |
Paper tray 3 |
|
8 |
Paper tray 4 |
|
20 |
Paper tray 5 |
|
21 |
Paper tray 6 |
|
22 |
Paper tray 7  NOTE
Only available for the imagePRESS C10000VP Series |
|
23 |
Paper tray 8 NOTE
Only available for the imagePRESS C10000VP Series |
|
28 |
Special feeder |
|
301 |
Inserter, tray 1 |
|
302 |
Inserter, tray 2 |
The following table shows the PCL output tray IDs that are supported to select the output destination.
For example, use command <Esc>&l1G to select the stacker top tray.
The imagePRESS C800 / C850 Series supports:
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
8 |
BOOKLETMAKER |
Stacker/stapler booklet tray |
|
9 |
FOLDER |
Folder main tray |
|
101 |
EXTERNAL |
External finisher |
The imagePRESS C10000VP Series supports:
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Stacker top tray |
|
2 |
STAPLER_LOWER | LOWER |
Stacker/stapler lower tray |
|
4 |
STACKER1_BULK |
Stacker stack tray |
|
5 |
STACKER2_BULK |
Left-hand stacker stack tray |
|
6 |
STAPLER_UPPER |
Stacker/stapler upper tray |
|
7 |
TOP2_TRAY |
Left-hand stacker top tray |
|
8 |
BOOKLETMAKER |
Stacker/stapler booklet tray |
|
9 |
FOLDER |
Folder main tray |
|
101 |
EXTERNAL |
External finisher |