The following table shows the PCL Input Tray IDs that are supported by the Océ VarioPrint 6000 Series. The input tray mapping can be changed via the Settings Editor.
For example, use command <Esc>&l4H to select input tray 3.
|
PCL Tray ID <Esc>&l#H |
Input tray |
|---|---|
|
1 |
Paper module 1, tray 1 |
|
2 |
Paper module 1, tray 2 |
|
4 |
Paper module 1, tray 3 |
|
8 |
Paper module 1, tray 4 |
|
20 |
Paper module 2, tray 1 |
|
21 |
Paper module 2, tray 2 |
|
22 |
Paper module 2, tray 3 |
|
23 |
Paper module 2, tray 4 |
|
24 |
Paper module 3, tray 1 |
|
25 |
Paper module 3, tray 2 |
|
26 |
Paper module 3, tray 3 |
|
27 |
Paper module 3, tray 4 |
|
99 |
Roll feeder |
The following table shows PCL Outputbin IDs that are supported to select the output destination.
For example, use command <Esc>&l1G to select the stacker top tray.
|
PCL <Esc>&l#G |
PJL set outbin=## PCL <esc>&n#Wp<##> |
Output tray |
|---|---|---|
|
0 |
Settings Editor default |
|
|
1 |
TOP1_TRAY | UPPER |
Finisher upper output |
|
2 |
STAPLER_LOWER | LOWER |
Finisher main output |
|
4 |
STACKER1_BULK |
Stacker |
|
5 |
STACKER2_BULK |
Stacker 2 |
|
10 |
STACKER3_BULK |
Stacker 3 |
|
101 |
EXTERNAL |
External finisher |