The SRA PCL5e commands are described in manual "PCL 5e for SRA-Controller U24721-J-Z247-2-7600".
The following table shows the PCL Input Tray IDs that are standard supported by the Océ VarioPrint 6000 Series.
|
PCL Tray ID <Esc>&l#H |
Input Tray |
|---|---|
|
1 |
Paper module 1, tray 1 |
|
2 |
Paper module 1, tray 2 |
|
4 |
Paper module 1, tray 3 |
|
8 |
Paper module 1, tray 4 |
|
20 |
Paper module 2, tray 1 |
|
21 |
Paper module 2, tray 2 |
|
22 |
Paper module 2, tray 3 |
|
23 |
Paper module 2, tray 4 |
|
301 |
Inserter, tray 1 |
|
302 |
Inserter, tray 2 |
For example:
Use command <Esc>&l4H to select input tray 2.
NOTE
The input tray mapping can be changed via the Settings Editor.
The following table shows PCL Outputbin IDs that are supported by the Océ VarioPrint 6000 Series to select the output destination.
|
PCL Outputbin ID <Esc>&l#G |
Output Tray |
|---|---|
|
1 |
Stacker 1 top tray |
|
2 |
Stacker/Stapler lower tray |
|
4 |
Stacker 1 main tray |
|
5 |
Stacker 2 main tray |
|
6 |
Stacker/Stapler upper tray |
|
7 |
Stacker 2 top tray |
|
9 |
Folder main tray |
|
101 |
External |
For example:
Use command <Esc>&l4G to select the Stacker.