Remove Uncured Ink on the Capstan

Before you begin

Supplies needed:

Put on gloves and goggles.
Ink Spill on Capstan
Wipe up the majority of the ink by dipping with the absorbent cloth.
Wipe up ink with cloth
Wet a new absorbent cloth with isopropyl alcohol and wipe up the remaining ink.
Wet fresh cloth with isopropyl alcohol

NOTE
It may be difficult to tell whether or not all the ink has left the surface. Continue to wet and wipe the capstan surface until the cloth does not show any sign of ink colour.

Wipe up remainder of ink
Allow adequate time for capstan to dry.
NOTE
If the scrubbing action leaves fibres from the cloth on the surface, wait for the surface to dry completely, then follow the procedure listed above for Removing Solid Debris.

When the capstan is kept clean and its rubber surface is free of stains or defects, you are ensured of accurate media transport and optimal print quality. If its surface is badly damaged, the capstan needs to be replaced.