The Océ Arizona 365 GT operator is responsible for the regular maintenance of the printer and, if it is installed, the roll media option. When the RMO unit is kept clean and free of blemishes and defects, you will be ensured of accurate media transport and optimal print quality. This section provides information about what is required for proper RMO maintenance and cleaning.
NOTE
Any time there is any foreign matter or debris on the platen or the capstan it must be removed immediately. Any spilled UV ink must be removed immediately, before it can cure from exposure to light.
The following table provides our recommended maintenance activities. This is a minimum requirement and frequency will depend on environmental conditions and operator work habits. How to clean the capstan is explained in detail in the next section.
|
Maintenance Action |
Contaminant |
|---|---|
|
Clean the platen |
Ink |
|
Glue (release liner) |
|
|
Silicon (release liner) |
|
|
Clean the capstan |
Paper dust |
|
Coffee, tea, lemonade, milk, etc. |
|
|
Ink (cured, uncured) |
|
|
Glue (release liner) |
|
|
Silicon (release liner - e.g. Avery control tag 180) |
|
|
Clean the media loading bay |
Dust |
|
Ink |