The machine supports several output locations for the printed jobs. The default configuration of your machine contains a stacker and the system output. The finisher is an optional output location. Furthermore, you can connect several optional external finishers to the machine.
NOTE
You need the optional finisher or another optional external finisher to staple the jobs.
The output locations|
Component |
Description |
|
|---|---|---|
|
1 |
[Stacker] |
The stacker is the default output location of the machine. The stacker capacity is 6,000 sheets, in 2 stacks of 3,000 sheets each (80 g/m² or 20 lb. bond). The stacker does not contain staple cartridges. Therefore, the stacker cannot be the output location for jobs that require staples. |
|
2 |
[System output] |
The system output is the output location for the following prints.
Make sure that you regularly remove the sheets from the system output. |
|
3 |
[Finisher] (optional) |
The optional finisher contains the following output trays.
The finisher contains 2 staple cartridges to staple the jobs. The 3 output trays can receive A4, Letter and similar media sizes. Stapled jobs (A4, Letter and similar media sizes only) go into the output trays. The total capacity of the output trays is 3,700 sheets (80 g/m² or 20 lb bond). NOTE
The output trays cannot receive tab sheets. |
|
4 |
[Finisher upper output] |
The finisher upper output is part of the finisher. The upper output can receive all formats. However, the upper output is mainly intended for large media or jobs with mixed size media. The maximum capacity of the upper output is 500 sheets (80 g/m² or 20 lb bond). NOTE
The upper output does not contain staple cartridges. Therefore, the upper output cannot be the output location for jobs that require staples. |