|
Specification |
Value |
|---|---|
|
Type |
Sheet-fed inkjet digital color press |
|
Resolution |
1200 x 1200 dpi Transaction printing mode: 600 dpi or 1200 dpi |
|
Inkjet technology |
Drop-on-demand; piezoelectric ink technology |
|
Print speed varioPRINT iX3200 |
A4: 320 ipm LTR: 312 ipm For more information on print speeds, see Print speed specifications |
|
Print speed varioPRINT iX2100 |
A4: 210 ipm LTR: 205 ipm |
|
Target volume per month |
1000K - 10000K A4 / LTR |
|
Warm-up time |
Cold printer: up to 25 minutes in ambient temperature 20°C / 68°F Warm printer: approximately 6 minutes |
|
Specification |
Value |
|---|---|
|
Maximum paper width |
Paper module Flex XL-C1: 350 mm / 13.7" Paper module Flex XL-C2: 356 mm / 14" |
|
Maximum paper length |
508 mm / 20" |
|
Maximum printable area |
337 mm x 504 mm - 13.3" x 19.8" |
|
Distance between edge and image |
minimum2 mm / 0.0787" in X- and Z-direction |
|
Color-to-color registration |
Less than 40 µm / 0.00157" between two colors |
|
Registration accuracy sheet |
< 40 μm between colors, < +/- 1 mm / 0.04" front-back and to image |
|
Ink |
Polymer water-based inks in four colors, cyan, magenta, yellow, and black |
|
ColorGrip |
ColorGrip (CG) |
|
Print order of CG and colors |
CG YMCK |
|
Print modes |
CMYK, K or combined (CMYK and K prints are separately counted) |
|
Media inspection |
On-the-fly detection of media imperfections related to paper squareness and height deformations. This can be caused for example by waves, bursts, folded corners. Sheets with detected imperfections are purged into the sentry tray. An overview of the sentry rejections is available on the control panel. |
|
Drop sizes (CMYK) |
Variable, two drop sizes: 2.4 and 5.7 pl |
|
Specification |
Value |
|---|---|
|
Description |
High-performance colour controller for varioPRINT iX-series |
|
Operating system |
Windows 10 Embedded |
|
RIP |
Two standard RIP units. Two optional RIP units. |
|
Interface |
2 x 1 Gigabit Ethernet (10/100/1000 Base-T), TCP/IP (LPR /LPD, 9100 Socket), Static IP / Auto-IP (DHCP) , IPv4, IPv6 (only in document printing mode) |
|
Printing modes |
Document printing, Transaction printing via SRA module |
|
Page description languages |
Document printing:
Variable data printing:
Transaction printing:
|
|
SNMP support |
SNMP v1/v3, Host resources MIB, MIB II, MIB, Job Monitor MIB, Job Management MIB (partially), IEEE 802.1x |
|
Job submission |
LPR, Hotfolders via WebDAV and SMB, Socket (streaming, JDF / JMF (native)), IPP 2.0, Remote PDF driver, USB drive |
|
Security |
E-shredding, HTTPs, LDAP, SNMPv3, Integrity checker, WebDav for SMB hotfolders, Encrypted user passwords, User authentication |
|
Spot color libraries |
HKS K, HKS K 3000+, HKS N, HKS N 3000+, Pantone® Solid-V5 (Uncoated / Coated) |
|
Standard functionality |
One PDL (PDF or IPDS or PCL), Schedule, Media print modes, Trapping, Streaming, Accounting, Hot folders, Remote service, E-shredding, Advanced color management, Remote PDF driver, PRISMAremote Monitoring, PPML v2.2, Trellix Integrity Checker, "Light" PDF interpreter for printing of SDS documents when only IPDS is installed. |
|
Options |
Speed license (210 or 320 ipm), PDF license, IPDS license, PDF for IPDS license, Fair license, PRISMAlytics Dashboard , PRISMAsync Simulator, PRISMAprofiler, Asian font set(s), DPlink, DocBox |
|
Action |
Description |
|---|---|
|
Nozzle Uniformity Control sheets (QA charts) |
Nozzle Uniformity Control sheets are printed to control the behavior of nozzles. QA charts can be printed on job media or alternative media. |
|
Non-uniformity |
When the printer detects non-uniform behavior from nozzles, corrections are performed. |
|
Nozzle Uniformity Control (NUC) interval |
Can be configured. Default: 2000 sheets |
|
Action |
Description |
|---|---|
|
Nozzle Activity Control sheet (QA charts) |
A nozzle activity control sheet is printed to detect non-performing nozzles. QA charts can be printed on job media or alternative media. |
|
Nozzle activity compensation |
Higher drop size by adjacent nozzles. |
|
Nozzle activity control (NAC) interval |
Can be configured. Default: 100 sheets |
|
Printhead maintenance to solve multiple non-performing nozzles |
When the number of non-performing nozzles surpasses a certain threshold, printhead maintenance takes place before the job continues. This behavior can be configured. |
|
Refresh dots and lines |
Refresh dots or refresh lines are jetted to keep the nozzles open and clean. |
|
Nozzle activity control (NAC) markers |
NAC markers are printed on the trailing edge of every sheet. |