Combined finishing selection

Left corner stapling and left edge punching

FINISH = STAPLE

STAPLEOPTION = TOPLEFT | BOTTOMLEFT

PUNCHNUM = 1 | 2 | 3 | 4 | 5

PUNCHOPTION = EDGELEFT

Right corner stapling and right edge punching

FINISH = STAPLE

STAPLEOPTION = TOPRIGHT | BOTTOMRIGHT

PUNCHNUM = 1 | 2 | 3 | 4 | 5

PUNCHOPTION = EDGERIGHT

Left edge stitching and punching

FINISH = STAPLE

STAPLEOPTION = EDGELEFT

PUNCHNUM = 1 | 2 | 3 | 4 | 5

PUNCHOPTION = EDGELEFT

Right edge stitching and punching

FINISH = STAPLE

STAPLEOPTION = EDGERIGHT

PUNCHNUM = 1 | 2 | 3 | 4 | 5

PUNCHOPTION = EDGERIGHT

Z-folding and left edge punching

FOLDING = Z-FOLD

PUNCHNUM = 1 | 2 | 3 | 4 | 5

PUNCHOPTION = EDGELEFT (right-side punch and Z-fold not relevant)

Z-Folding and corner stapling of mixed size set

FOLDING = Z-FOLD

FINISH = STAPLE

STAPLEOPTION = TOPLEFT | BOTTOMLEFT

(right-side staple and Z-fold is not relevant)

Z-Folding and edge stitching of mixed size set

FOLDING = Z-FOLD

FINISH = STAPLE

STAPLEOPTION = EDGELEFT (right-side staple and Z-fold is not relevant)

Booklet (center-fold and center stitch)

FINISH = CENTER

FOLDING = MULTICENTERIN (optional : center implies multi-centerfold)

Booklet (center-fold and center stitch and one-edge trim)

FINISH = CENTER

FOLDING = MULTICENTERIN (optional : center implies multi-centerfold)

TRIMOPTION = ONEEDGE

RIGHTEDGETRIM = 5

or

TRIMWIDTH = value (depends on sheet-size)

Booklet (center-fold and center stitch and three-edge trim)

FINISH = CENTER

FOLDING = MULTICENTERIN (optional : center implies multi-centerfold)

TRIMOPTION = THREEEDGE

BOTTOMEDGETRIM = 5

TOPEDGETRIM = 5

RIGHTEDGETRIM = 5 (optional or 0, if only top-bottom trim is needed)

or

TRIMWIDTH = value (depends on sheet-size)

Booklet (center-fold and one-edge trim)

FOLDING = MULTICENTERIN

TRIMOPTION = ONEEDGE

RIGHTEDGETRIM = 5

or

TRIMWIDTH = value (depends on sheet-size)

Booklet (center-fold and three-edge trim)

FOLDING = MULTICENTERIN

TRIMOPTION = THREEEDGE

BOTTOMEDGETRIM = 5

TOPEDGETRIM = 5

RIGHTEDGETRIM = 5 (optional or 0, if only top-bottom trim is needed)

or

TRIMWIDTH = value (depends on sheet-size)

Booklet with asymmetrical top/bottom edge trimming

BOTTOMEDGETRIM = X

TOPEDGETRIM = Y

X is not equal to Y.

Asymmetrical trimming is not supported. Therefore, the functional behaviour will be: BOTTOMEDGETRIM = TOPEDGETRIM = (X+Y)/2