String search
Word search

Print an application with [FLXfinish+ spots] 

Introduction

With the [FLXfinish+ spots] recipe you can print a job that is printed partly in matte and partly in gloss.

The gloss data must be present as spot data named Gloss in the PDF.

NOTE

In order to create FLXfinish+ applications, a CMYKSS profile with a FLXfinish+ print mode is needed.

Procedure

  1. Open PRISMAguide XL Engine via the shortcut on your desktop or start menu.
  2. Click on [New job]
  3. Select the [FLXfinish+ spots] recipe.
  4. The [Overview] tab opens.

    Check / select the settings for:

    • [Printer]

    • [Media]

    • [Print mode]

  5. Click on [Select file].
  6. Open a PDF that you want to print using the [FLXfinish+ layers] recipe.
    NOTE

    The PDF must contain a single page with spot data named: 'Gloss'. These elements will be printed in gloss.

  7. Open the [Layers] tab.

    The recipe automatically assigns the correct settings per layer and merges the two layers.

    NOTE

    A FLXfinish+ application can only have one layer per side.

    If you want to check the separate layers, click the button [Unmerge layer].

    Layer number

    [Layer source]

    [Type]

    Remark

    [Front] 2

    Spot - Gloss

    [Image area mask]

    [Color]: [Gloss]

    The part of the image that will be printed in [Gloss].

    [Front] 1

    PDF with Spot Gloss

    [Color]

    The image is printed in CMYK.

    NOTE

    Do not forget to merge the layers again. Select [Front] 1 and [Front] 2 layer (hold down the ctrl key) and click [Merge selected layers].

  8. Open the [Print] tab and check the settings.
  9. Click on the [Print] button to submit the job.
Parent topic:
Default recipes
Privacy Terms of use Cookie information