PRISMAsync supports the use of calibration curves created by an external tool, for example CHROMiX Curve3 ™. PRISMAsync uses media families to indicate which output profiles and calibration curves must be applied to a media. Hence, the creation of a new media family with the factory default G7 output profiles is part of this procedure. PRISMAsync has regular media families and G7 media families.
A file with a chart intended for G7 calibration, for example the P2P25 or P2P51 calibration chart.
Calibrate the printer.
IMPORTANT
You must always perform a printer calibration before you continue with this procedure.
Create a G7 media family in the Settings Editor:
Open the Settings Editor.
Create a new G7 media family.
Create a new media for the G7 media family.
Print the G7 measurement chart via an automated workflow:
Create a new automated workflow.
Select the media on which the measurement chart will be printed.
At [Printing of measurement charts] select [G7® calibration] to print without color management.
Print the G7 measurement chart via the G7 automated workflow.
Measure the calibration chart:
Measure the chart, for example with an X-Rite ™ device.
Calculate the calibration curves with the external tool.
Import the calculated G7 calibration curves to the G7 media family in the Settings Editor:
Open the Settings Editor.
Open the new G7 media family.
Touch [Import CMYK curves] to import the calibration curves.
You can only disable G7 support in the Settings Editor when all G7 media families are removed.