The input capacity of the print system can be extended with a bulk paper module. This bulk paper module can hold up to 3500 sheets of paper, 80 g/m² (22 lb bond). The paper tray feeds the media face up.
When you load envelopes in the bulk paper module, you need the envelope guide.
Location of the bulk paper module
Bulk paper module|
Description bulk paper module |
|
|---|---|
|
1 |
Release button to move the bulk paper module |
|
2 |
Button to open the paper tray |
|
3 |
Paper tray to hold the media |
|
4 |
POD Deck Lite Attachment Kit-C to attach the bulk paper module to the printer |
CAUTION
When you handle paper, take care not to cut your hands at the edges of the paper.
IMPORTANT
Do not lift the inside lifter of the paper tray if the printer is on. This can cause a malfunction or machine damage. If you need to lift the inside lifter of the paper tray, for example, because you dropped something, turn off the printer with the paper trays open.
IMPORTANT
Do not hit to the right-hand paper guide when you load the media. This can cause a malfunction or machine damage.
Never place paper or other objects in the empty parts of the paper tray. This can cause a paper jam.
Do not insert paper clips or other objects into the paper blower port of the bulk paper module.
Make sure you follow the instructions carefully. When you do not load the media correctly, a paper jam, dirty machine parts or poor print quality can occur.
Check and prepare the media.
Awake the print system from sleep mode if applicable.
|
Action |
||
|---|---|---|
|
1 |
Press the button (1) to open the bulk paper tray (2). |
|
|
When the media size does not change continue with step 5. Otherwise, go to step 2. |
||
|
2 |
Slide the right-hand paper guide to the right-hand side of the paper tray. |
|
|
3 |
Remove all media. |
|
|
4 |
Close the paper tray and open it again. |
|
|
4 |
Squeeze the lever and slide the paper guides so that there is enough space to load the media. |
|
|
5 |
Load a media stack of approximately 20 mm (0.8 inch) against the left-hand side wall of the paper tray. |
|
|
6 |
Squeeze the front-side paper guide and slide the paper guides against the media stack. |
|
|
7 |
Slide the right-hand paper guide to the media stack and check the size mark for the exact alignment. IMPORTANT
When you don not align the right-hand paper guide properly, a paper jam, poor print quality, or dirty machine parts can occur. |
|
|
8 |
Load all remaining paper into the paper tray. IMPORTANT
|
|
|
9 |
Gently close the paper tray and make sure it clicks into place. CAUTION
When you close the bulk paper module, be careful not to get your fingers caught. This can cause personal injury. |
|
When a paper jam occurs or you notice poor image quality, turn over the media stack and reload the media stack. Do not reload textured, single-sided coated or already printed paper to avoid a next paper jam. Take a new stack for these media.
Tightly rewrap the remaining media in the original package and store the package in a dry place, away from direct sunlight or high temperatures.
).
/
). Use the correct orientation for the envelopes.