[Cut size] 

[Cut method]

Select the cut method:

• [Standard] to cut the printed output according to a standard size based on the size of the selected media source.

• [Synchro] to cut the printed output according to the size of the image. There is a minimum cut length that varies according to the printer model.

Note that the cut method has impact on scaling.

[Leading strip]

Add a blank strip to the top of the printed output to correct the length. The adjustment of the edges changes the size of the printed output.

The [Leading strip] adds a strip of the specified length to the top of the printed output: 0 to 400 mm (0 to 15.75 inch).

NOTE

The system displays the values in mm or Inch, defined in the [General settings].

[Trailing strip]

Add a strip to the bottom of the printed output to correct the length. The adjustment of the edges changes the size of the printed output.

The [Trailing strip] adds a strip of the specified length to the bottom of the printed output: 0 to 400 mm (0 to 15.75 inch).

NOTE

The system displays the values in mm or Inch, defined in the [General settings].

[Cut method]

Select the cut method:

• [Synchro] to cut the printed output according to the size of the image. There is a minimum cut length that varies according to the printer model.

• [Standard] to cut the printed output according to a standard size based on the size of the selected media source. Select a size from the drop-down list, or select automatic.

When the roll size is unknown, only automatic can be selected. Note that the cut method has impact on scaling.