You can submit and print a job via the RIP.
Make sure you have one of the supported RIP applications installed and connected to the printer.
|
1 |
Open the RIP. |
|
|
2 |
Load one or more files you want to print. |
|
|
3 |
Make sure the media is added to the media catalog on the user interface. See Define media or check the website of your RIP supplier for documentation. |
|
|
Make sure media is loaded. See Load rigid media and Load a media roll. To print on roll media, it is recommended to set up the media edge guards. See Position the media edge guards. |
||
|
4 |
Submit the job. For roll media, the printer will ask you to configure the print side and winding direction. For rigid media, you have to manually feed media as you print. See Print on rigid media.  NOTE
When you submit a job from ONYX, it is recommended to enable the setting [Specify Physical Width] and set the width the same as the desired media size. This ensures that the job is assigned to the correct media. |
|
|
5 |
Send the submitted job to the print queue. See Navigate the print queue. |
|
|
6 |
Collect your output at the output side of printer. |