|
Step |
Action |
|---|---|
|
1 |
Check whether the media roll you use is almost empty. If yes load a new media roll. |
|
2 |
When you have recently placed a new printhead, perform the Replace printheads procedure to re-seat the new printhead. |
|
3 |
Check whether the problem is resolved by printing the printhead condition test print. If the problem persists, clean the print surface and the vacuum holes |
|
4 |
Check whether the problem is resolved by printing the printhead condition test print. If the problem persists, replace the printhead. |
|
5 |
Check whether the problem is resolved by printing the printhead condition test print. If the problem persists, call your local Service Provider. |