Change the print delivery for the job

Output settings

Output settings

Change the print delivery

Print delivery

1. Open the job in the [Edit job] app.

2. Click [Print delivery].

3. Use the [Output location]  drop-down list to select the required tray.

4. Use the [Sort]  setting to select the sorting method.

   • [By set]: prints are sorted by set.

   • [By page]: prints are sorted by page.

5. Use the [Offset stacking]  to indicate if you want to apply offset stacking for each delivered set or per group of sets.

6. Use the [Sheet order]  to define the sheet order in the output tray:

   • [Face up]: front side of first printed sheet is visible.

   • [Face up reverse]: front side of last printed sheet is visible.

   • [Face down]: back side of last printed sheet is visible.

   • [Face down reverse]: back side of last document page is visible.

7. Use the [Sheet orientation]  to define the sheet orientation in the output tray.

   • [Header up LEF]: long-edge feed direction, header of printed document pages points to the back side of printer.

   • [Header up SEF]: short-edge feed direction, header of printed document pages points to the back side of printer.

   • [Header down LEF]: long-edge feed direction, header of printed document pages points to the front side of printer.

   • [Header down SEF]: short-edge feed direction, header of printed document pages points to the front side of printer.

8. Use the [Print order]  setting to define which source file page is printed first.

   • [Front/back]: the first source file page is printed first.

   • [Back/front]: the last source file page is printed first.

9. Use the [Rotation]  setting to indicate if the imposition must be rotated.

   • [0 degrees]: the imposition is not rotated.

   • [180 degrees]: the imposition is rotated 180 degrees.

10. Close the pop-up window.

11. Click [OK] to save the changes.