Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [Пользовательские настройки]  → [Параметры системы] .

   [Параметры системы] tab

2. Go to the [Последовательности операций печати] and [Управление заданиями] sections.

   [Последовательности операций печати] and [Управление заданиями] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [Передача потока] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Получение, затем печать во время обработки растровых изображений] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [Печать через сокет] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [Передача потока]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Получение, затем печать во время обработки растровых изображений]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[Печать через сокет] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [Размер подпакета для восстановления после ошибок] setting to define the number of pages that will be printed again after the error is solved.

[Размер подпакета для восстановления после ошибок] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [Порядок обработки заданий из папки быстрых задач] setting to indicate how jobs are processed in the hotfolder.

• [Время поступления]: job processing takes place when the job arrives in the hotfolder.

• [В алфавитном порядке по имени файла]: job processing takes place according to the alphabetical order of the job names.

  [Порядок обработки заданий из папки быстрых задач] setting

Define if users are allowed to print from a USB drive

Use the [Печать с USB] setting to indicate whether printing from a USB drive is allowed.

[Печать с USB] setting

Define the location of the RIP process

Use the [Местоположение растрируемых заданий] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [Все расположения]: the RIP can process jobs in all job destinations.

• [Список запланированных заданий]: the RIP can only process jobs when they are in the list of scheduled jobs.

[Местоположение растрируемых заданий] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [База управляющей информации заданий] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[База управляющей информации заданий] setting

Define if default originals are 1- or 2-sided

Use the [Стороны оригиналов] setting to indicate if originals have information on one or both sides.

[Стороны оригиналов] setting

Define if job templates must reopen after starting a copy or scan job

Use the [Режим простого копирования и сканирования] setting to indicate that you want to enable the easy copy and scan mode.

• [Включен]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [Отключен]: the last used job template will close when the operator starts a new copy or scan job.

[Режим простого копирования и сканирования] setting