Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [Preferanser]  → [Systeminnstillinger] .

   [Systeminnstillinger] tab

2. Go to the [Arbeidsflyter for utskrift] and [Jobbehandling] sections.

   [Arbeidsflyter for utskrift] and [Jobbehandling] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [Overføring] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Motta deretter skriv ut mens RIP] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [Kontaktutskrift] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [Overføring]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Motta deretter skriv ut mens RIP]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[Kontaktutskrift] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [Delsettstørrelse for feilgjenoppretting] setting to define the number of pages that will be printed again after the error is solved.

[Delsettstørrelse for feilgjenoppretting] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [Behandling av aktiveringsmapper] setting to indicate how jobs are processed in the hotfolder.

• [Ankomsttid]: job processing takes place when the job arrives in the hotfolder.

• [Rekkefølge på grunnlag av jobbnavn]: job processing takes place according to the alphabetical order of the job names.

  [Behandling av aktiveringsmapper] setting

Define if users are allowed to print from a USB drive

Use the [Utskrift fra USB] setting to indicate whether printing from a USB drive is allowed.

[Utskrift fra USB] setting

Define the location of the RIP process

Use the [Sted for RIP-prosess] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [Alle steder]: the RIP can process jobs in all job destinations.

• [Liste over planlagte jobber]: the RIP can only process jobs when they are in the list of scheduled jobs.

[Sted for RIP-prosess] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [Jobb-MIB] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[Jobb-MIB] setting

Define if default originals are 1- or 2-sided

Use the [Sider av originaler] setting to indicate if originals have information on one or both sides.

[Sider av originaler] setting

Define if job templates must reopen after starting a copy or scan job

Use the [Enkel kopierings- og skannemodus] setting to indicate that you want to enable the easy copy and scan mode.

• [Aktivert]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [Deaktivert]: the last used job template will close when the operator starts a new copy or scan job.

[Enkel kopierings- og skannemodus] setting