Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [기본 설정]  → [시스템 설정] .

   [시스템 설정] tab

2. Go to the [인쇄 워크플로] and [작업 관리] sections.

   [인쇄 워크플로] and [작업 관리] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [스트리밍] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [수신후 동시에 RIP 처리/인쇄] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [소켓 인쇄] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [스트리밍]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [수신후 동시에 RIP 처리/인쇄]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[소켓 인쇄] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [에러 복구에 대한 서브셋 크기] setting to define the number of pages that will be printed again after the error is solved.

[에러 복구에 대한 서브셋 크기] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [핫 폴더 작업 처리] setting to indicate how jobs are processed in the hotfolder.

• [도착 시간에]: job processing takes place when the job arrives in the hotfolder.

• [작업 이름 순서대로]: job processing takes place according to the alphabetical order of the job names.

  [핫 폴더 작업 처리] setting

Define if users are allowed to print from a USB drive

Use the [USB에서 인쇄] setting to indicate whether printing from a USB drive is allowed.

[USB에서 인쇄] setting

Define the location of the RIP process

Use the [RIP 처리 위치] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [모든 지역]: the RIP can process jobs in all job destinations.

• [예약된 작업 목록]: the RIP can only process jobs when they are in the list of scheduled jobs.

[RIP 처리 위치] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [작업 MIB] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[작업 MIB] setting

Define if default originals are 1- or 2-sided

Use the [원본의 면] setting to indicate if originals have information on one or both sides.

[원본의 면] setting

Define if job templates must reopen after starting a copy or scan job

Use the [간편 복사 및 스캔 모드] setting to indicate that you want to enable the easy copy and scan mode.

• [유효]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [무효]: the last used job template will close when the operator starts a new copy or scan job.

[간편 복사 및 스캔 모드] setting