Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [基本設定]  → [システム設定] .

   [システム設定] tab

2. Go to the [プリント ワークフロー] and [ジョブ管理] sections.

   [プリント ワークフロー] and [ジョブ管理] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [ストリーミング] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [受信後同時に RIP 処理/プリント] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [ソケット プリント] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [ストリーミング]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [受信後同時に RIP 処理/プリント]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[ソケット プリント] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [エラー回復のサブセット サイズ] setting to define the number of pages that will be printed again after the error is solved.

[エラー回復のサブセット サイズ] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [ホット フォルダのジョブの処理] setting to indicate how jobs are processed in the hotfolder.

• [受信時刻順]: job processing takes place when the job arrives in the hotfolder.

• [ジョブ名順]: job processing takes place according to the alphabetical order of the job names.

  [ホット フォルダのジョブの処理] setting

Define if users are allowed to print from a USB drive

Use the [USB からの印刷] setting to indicate whether printing from a USB drive is allowed.

[USB からの印刷] setting

Define the location of the RIP process

Use the [RIP 処理する場所] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [すべての場所]: the RIP can process jobs in all job destinations.

• [スケジュールされたジョブのリスト]: the RIP can only process jobs when they are in the list of scheduled jobs.

[RIP 処理する場所] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [ジョブ MIB] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[ジョブ MIB] setting

Define if default originals are 1- or 2-sided

Use the [原稿のスキャン面] setting to indicate if originals have information on one or both sides.

[原稿のスキャン面] setting

Define if job templates must reopen after starting a copy or scan job

Use the [簡易コピー/スキャン モード] setting to indicate that you want to enable the easy copy and scan mode.

• [有効]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [無効]: the last used job template will close when the operator starts a new copy or scan job.

[簡易コピー/スキャン モード] setting