Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [Määritykset]  → [Järjestelmäasetukset] .

   [Järjestelmäasetukset] tab

2. Go to the [Tulostuksen työnkulku] and [Töiden hallinta] sections.

   [Tulostuksen työnkulku] and [Töiden hallinta] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [Tietovirta] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Vastaanota ja tulosta rasteroinnin aikana] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [Socket printing] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [Tietovirta]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Vastaanota ja tulosta rasteroinnin aikana]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[Socket printing] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [Alasarjan koko virheiden korjaamista varten] setting to define the number of pages that will be printed again after the error is solved.

[Alasarjan koko virheiden korjaamista varten] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [Käynnistyskansiotöiden käsittely] setting to indicate how jobs are processed in the hotfolder.

• [Saapumisajan mukaan]: job processing takes place when the job arrives in the hotfolder.

• [Työn nimen mukaisessa järjestyksessä]: job processing takes place according to the alphabetical order of the job names.

  [Käynnistyskansiotöiden käsittely] setting

Define if users are allowed to print from a USB drive

Use the [Tulosta USB:ltä] setting to indicate whether printing from a USB drive is allowed.

[Tulosta USB:ltä] setting

Define the location of the RIP process

Use the [Sijainnin RIP-prosessi] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [Kaikki sijainnit]: the RIP can process jobs in all job destinations.

• [Ajoitettujen töiden luettelo]: the RIP can only process jobs when they are in the list of scheduled jobs.

[Sijainnin RIP-prosessi] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [MIB-työ] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[MIB-työ] setting

Define if default originals are 1- or 2-sided

Use the [Alkuperäisten puolet] setting to indicate if originals have information on one or both sides.

[Alkuperäisten puolet] setting

Define if job templates must reopen after starting a copy or scan job

Use the [Helpon kopioimisen ja skannauksen tila] setting to indicate that you want to enable the easy copy and scan mode.

• [Käytössä]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [Ei käytössä]: the last used job template will close when the operator starts a new copy or scan job.

[Helpon kopioimisen ja skannauksen tila] setting