Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [Preference]  → [Nastavení systému] .

   [Nastavení systému] tab

2. Go to the [Postup zpracování tisku] and [Správa úloh] sections.

   [Postup zpracování tisku] and [Správa úloh] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [Proudové zpracování] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Přijmout a pak tisknout při rastrování] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [Soketový tisk] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [Proudové zpracování]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Přijmout a pak tisknout při rastrování]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[Soketový tisk] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [Velikost dílčí sady pro zotavení z chyb] setting to define the number of pages that will be printed again after the error is solved.

[Velikost dílčí sady pro zotavení z chyb] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [Zpracování úloh v aktivní složce] setting to indicate how jobs are processed in the hotfolder.

• [V čase příchodu]: job processing takes place when the job arrives in the hotfolder.

• [Pořadí podle názvu úlohy]: job processing takes place according to the alphabetical order of the job names.

  [Zpracování úloh v aktivní složce] setting

Define if users are allowed to print from a USB drive

Use the [Tisk ze zařízení USB] setting to indicate whether printing from a USB drive is allowed.

[Tisk ze zařízení USB] setting

Define the location of the RIP process

Use the [Umístění pro zpracování RIP] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [Všechna umístění]: the RIP can process jobs in all job destinations.

• [Seznam naplánovaných úloh]: the RIP can only process jobs when they are in the list of scheduled jobs.

[Umístění pro zpracování RIP] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [Úloha MIB] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[Úloha MIB] setting

Define if default originals are 1- or 2-sided

Use the [Velikost originálů] setting to indicate if originals have information on one or both sides.

[Velikost originálů] setting

Define if job templates must reopen after starting a copy or scan job

Use the [Snadný režim kopírování a skenování] setting to indicate that you want to enable the easy copy and scan mode.

• [Povoleno]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [Zakázáno]: the last used job template will close when the operator starts a new copy or scan job.

[Snadný režim kopírování a skenování] setting