Define default job processing

You can define how jobs are processed by default.

1. Open the Settings Editor and go to: [Preferences]  → [System settings] .

   [System settings] tab

2. Go to the [Printing workflows] and [Job management] sections.

   [Printing workflows] and [Job management] sections

Define the processing of jobs submitted via LPD/LPR

The printer protocol LPD can be enabled by the system administrator. The print protocol LPR must be installed on the workstation that submits the jobs.

Use the [LPD] setting to indicate when the RIP starts to process LPR jobs.

• [Streaming] is applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Receive, then print while RIP is in progress] is the default value and is applicable to smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[LPD] setting

Define the processing of jobs that use the socket printing port

Socket printing can be enabled and configured by the system administrator.

Use the [Socket printing] setting to indicate when the RIP starts to process jobs that use the socket printing port.

• [Streaming]: is default value and applicable to large jobs. The job is processed by the RIP and printing can start at the same time.

• [Receive, then print while RIP is in progress]: is applicable to for smaller jobs that have multiple sets. The RIP starts to process the jobs after they arrive in the print queue and before the whole job has been received.

[Socket printing] setting

Define the number of printed pages when an error occurs in a streaming job

Use the [Subset size for error recovery] setting to define the number of pages that will be printed again after the error is solved.

[Subset size for error recovery] setting

Define if users are allowed to print from a USB drive

Use the [Print from USB] setting to indicate whether printing from a USB drive is allowed.

[Print from USB] setting

Define the processing order of hotfolder jobs

The system administrator can change the processing order of hotfolder jobs.

Use the [Processing of hotfolder jobs] setting to indicate how jobs are processed in the hotfolder.

• [At arrival time]: job processing takes place when the job arrives in the hotfolder.

• [Order based on job name]: job processing takes place according to the alphabetical order of the job names.

  [Processing of hotfolder jobs] setting

Define the location of the RIP process

Use the [Location RIP process] setting to indicate where the RIP processes jobs when they arrive in the print queue.

• [All locations]: the RIP can process jobs in all job destinations.

• [List of scheduled jobs]: the RIP can only process jobs when they are in the list of scheduled jobs.

[Location RIP process] setting

Define if remote monitoring of jobs via SNMP is allowed

Use the [Job MIB] setting to indicate if remote monitoring of jobs via SNMP is allowed.

[Job MIB] setting

Define if default originals are 1- or 2-sided

Use the [Sides of originals] setting to indicate if originals have information on one or both sides.

[Sides of originals] setting

Define if job templates must reopen after starting a copy or scan job

Use the [Easy copy and scan mode] setting to indicate that you want to enable the easy copy and scan mode.

• [Enabled]: the last used job template will be re-opened when the operator starts a new copy or scan job.

• [Disabled]: the last used job template will close when the operator starts a new copy or scan job.

[Easy copy and scan mode] setting