String search
Word search

Configure the roll-to-roll mode

Introduction

When you want to use the take-up unit, your printer has to be in the roll-to-roll mode. When you enable the roll-to-roll mode, the printer will not cut between pages. You can also configure the roll-to-roll mode in WebTools Express.

NOTE

  • When the roll-to-roll mode is enabled, each print job is delivered to the [Back output]; even when you set the [Top delivery tray] as output location for your prints.

  • To calibrate the printer the roll-to-roll mode must be disabled.

  • When the printer is in roll-to-roll mode, you have to cut the media before you can replace a toner cartridge.

Procedure

  1. Tap on the system menu thumbnail. The system menu opens.
  2. Tap on [Roll-to-roll option] in the list in the right part of the display.
  3. Log in as a Key operator.
  4. Select [Roll-to-roll disabled] or [Roll-to-roll enabled].
  5. Tap [Ok] to confirm, or [Cancel] to reject your entries.
Parent topic:
The take-up module (optional) and the Roll Wind module (optional)
Privacy Terms of use Cookie information