Configure printer adjustments

Go to the printer adjustment settings

1. Open the Settings Editor and go to: [Preferences]  → [System adjustments] .

   

Adjust fold locations

1. Go to the folding option you want to adjust:

   • [Fold location for tri-fold in]

   • [Fold location for Z-folding]

   • [Fold location for tri-fold out]

   • [Fold location for half-folding]

   • [Fold location of front panel for double parallel folding]

   • [Fold location of back panel for double parallel folding]

2. Define the adjustment value.

   

3. Click [OK].

Enable offset stacking in the stack tray

1. Go to [Stack tray - Offset stacking].

2. Define the offset stacking value.

   

3. Click [OK].

Define the minimum filling level of the stackers

1. Go to [Minimum filling level].

2. Define the level.

   

3. Click [OK].

Define the maximum stack height of the stackers

1. Go to [Maximum stack height].

2. Define the height.

   

3. Click [OK].

Productivity or correct staple position for jobs with two staples

1. Go to [Priority mode for jobs with two staples].

2. Select the priority.

   

3. Click [OK].

Adjust the trimming size of the Perfect Binder

1. Go to [Fine adjustment of the Perfect Binding finishing size (horizontal)].

2. Adjust the horizontal size.

   

3. Go to [Fine adjustment of the Perfect Binding finishing size (vertical)].

4. Adjust the vertical size.

   

5. Click [OK].

Adjust the alignment guides for stapling

1. Go to [Adjustment of the alignment guides for stapling].

2. Define the width.

   

3. Click [OK].

Adjust the alignment of the stacker/stapler trays

1. Go to [Adjustment of the alignment of the stacker/stapler upper tray].

2. Adjust the alignment for the upper tray.

   

3. Go to [Adjustment of the alignment of the stacker/stapler lower tray].

4. Adjust the alignment for the lower tray.

   

5. Click [OK].

Productivity or sheet alignment for jobs with thin paper

1. Go to [Priority mode for jobs with thin paper].

2. Select the priority.

   

3. Click [OK].

Productivity or sheet alignment for saddle-stitched jobs with few pages

1. Go to [Priority mode for saddle-stitched jobs with few pages].

2. Select the priority.

   

3. Click [OK].

Enable high-volume stacking for the stacker/stapler

1. Go to [High-volume mode].

2. Select the priority.

   

3. Click [OK].

Define how the professional puncher may be used

The professional puncher usage can be defined by the system administrator.

1. Go to [Professional puncher usage].

2. Define the usage.

   

3. Click [OK].

Adjust when and how long the fixing belt needs to be refreshed

1. Go to [Fixing belt auto refresh level].

2. Adjust the default level.

   

3. Click [OK].

Remove a color cast that occurs on a white background

1. Go to the settings:

   [Color cast correction: Cyan]

   [Color cast correction: Magenta]

   [Color cast correction: Yellow]

   [Color cast correction: Black]

2. Adjust the default correction level.

   

3. Click [OK].

4. Perform a printer and media family calibration. (Learn about calibration)

Remove white gaps between areas

1. Go to [White gap correction].

2. Adjust the default level.

   

3. Click [OK].

4. Perform an automatic gradation adjustment. (Learn about calibration)

Increase print quality for jobs on heavy paper but with loss of print speed

1. Enable the setting [Low temperature environment mode].

   

2. Click [OK].

Remove uneven gloss

1. Go to [Uneven gloss correction].

2. Decrease the level to reduce the uneven gloss.

   

3. Click [OK].

Remove partial distortions or thin white lines due in an environment with high temperature or high humidity

1. Go to [Adjust drum temperature].

2. Increase the drum temperature.

   

3. Click [OK].

Smoothen jagged outlines

1. Go to [Special smoothing].

2. Enable the setting.

   

3. Click [OK].

Increase productivity for jobs with heavy media but with loss of print quality

1. Go to [Productivity or quality priority for heavy media].

2. Select the required setting.

   

3. Click [OK].

Increase productivity for jobs with coated media but with loss of print quality

1. Go to [Productivity or gloss quality priority for coated media].

2. Select the required setting.

   

3. Click [OK].

Increase print quality for jobs with mixed-size media but with loss of productivity

1. Go to [Productivity or image quality priority for mixed media].

2. Select the required setting.

   

3. Click [OK].

Increase the frequency of the gradation adjustment during printing but with loss of productivity

1. Go to [Gradation adjustment during printing].

2. Select the required setting.

   

3. Click [OK].

Scan documents with extreme thin lines

1. Go to [Streak prevention].

2. Disable the setting.

   

3. Click [OK].