Edit with automated workflow in job destination

[Edit with automated workflow]

[Overrule job ticket]

The properties of the automated workflow can overrule the properties defined in the job ticket. This is the default behaviour of an automated workflow. When you want to apply a JDF ticket in a hotfolder, ensure the check box is not checked.

[Note for operator]

Create a print or finishing instruction for the operator.

[Number of sets]

Enter the number of sets.

[Sorting]

Select if sorting occurs by set or by page.

[Media]

Select the media from the media catalogue.

[Fit to media size]

Use this setting to indicate how the document pages are resized according to the size of the selected media: [Scale every page to media size], [Clip pages to media size], or [Ignore the media size]. When you select the attribute [Ignore the media size], the media size defined in the job is applied.

[Print sides]

Select if jobs are printed one- or two-sided.

[Orientation]

Select the reading direction of the prints: [Portrait] or [Landscape].

[Rotate 180 degrees]

Use this setting to rotate the imposition 180 degrees.

[Tumble]

Select the binding edge of the output. The [Tumble] setting rotates the imposition of the back side 180 degrees.

[Impositioning]

Select the required imposition.

[Impositioning size]

Select the size of the imposition in case the media are unknown.

[Margin Shift]

Select this setting to define the margin shift of the front side and the back side in two directions. Enter: '0' to indicate that there is not shift required.

[Image shift]

Select this attribute to define the image shift of the front side and the back side in two directions. Enter: '0' to indicate that there is no shift required.

If [Impositioning] is set to [Same-up custom], the following settings become available:

[Cut and stack]

Use this setting to indicate if you want to cut and stack the sheets.

[Cut and stack process]

Select how you want to stack the sheets.

[First stacking direction]

Select the first stacking direction.

[Second stacking direction]

Select the second stacking direction.

[Columns]

Select the number of columns.

[Rows]

Select the number of rows.

[Auto spacing]

Indicate if you want to use the automatic gutter spacing option. The automatic gutter spacing option sizes gutters so that the document's pages fill the entire available space in the layout. The [Auto spacing] setting becomes available only if [Print trim marks] is selected.

[Column spacing (mm)]

Define the distance between columns. This setting only becomes available if [Print trim marks] setting is enabled.

[Row spacing (mm)]

Define the distance between rows. This setting only becomes available if [Print trim marks] setting is enabled.

[Column selection]

Select specific columns.

[Column rotation]

Select how you want to rotate the column(s) that you selected.

[Row selection]

Select specific rows.

[Row rotation]

Select how you want to rotate the row(s) that you selected.

[Front or booklet cover]

Select the media for the front cover.

[Printing on front cover]

Indicate if the cover is printed or not.

[Media print mode of front cover]

Select the required media print mode.

[Back cover]

Select the media for the back cover.

[Printing on back cover]

Indicate if the cover is printed or not.

[Perfect binding]

Indicate if and where the job is bound.

[Stapling]

Select the staple method and location.

[Saddle press strength]

Define the value for saddle press stapling: between -10 and +10.

[Output tray]

Select the paper tray of the prints.

[Sheet order]

Select the order of the prints in the output tray.

[Feed edge]

Select the orientation of the prints in the output tray.

[Header orientation]

Select the header orientation of the prints in the output tray.

[Print order]

Indicate the delivery order of the sheets.

[Offset stacking]

Indicate if the stacking occurs with or without an offset.

[Offset after N sets]

Indicate if a group of sets is delivered with an offset. N means the number of sets in a group.

[Punching]

Select the number of punch holes and their location.

[Perforating]

Select the perforation type and location.

[Folding]

Select the folding method.

[Fold side]

Indicate the fold side: [Inside] or [Outside].

[Creasing]

Select the creasing method.

[Sheets]

Indicate the pages you want to crease.

[Trimming]

Select the trimming method.

[Print trim marks]

Indicate if you want to print trim marks.

[Width ({0})]

Enter the width of the trim marks.

[Height: ({0})]

Enter the height of the trim marks.

[Horizontal trim shift: ({0})]

Use this setting to shift the trim marks horizontally.

[Vertical trim shift: ({0})]

Use this setting to shift the trim marks vertically.

[Horizontal alignment]

Indicate if the trim marks need to be aligned horizontally.

[Vertical alignment]

Indicate if the trim marks need to be aligned vertically.

[Resolution]

Use this setting to indicate the print resolution.

[Sensing unit adjustments]

Use this setting to select an automatic adjustment to be performed by the sensing unit: media registration, density, media registration and density or none.

[Mode for automatic adjustment]

Use this setting to select the mode for the automatic adjustment in the sensing unit: continuous or interrupt mode.

[Image smoothing]

Use this setting to apply an anti-aliasing algorithm to smooth images with a low resolution.

[Moiré reduction for images]

Apply a Moiré reduction algorithm to enhance photographic images. When images have a resolution below 300 dpi, the Moiré reduction only takes effect when image smoothing is enabled.

[Trapping preset]

Select a trapping preset.

[Color preset]

Select a colour preset.

[Color bar], [Location], [Alignment]

When you want to print a colour bar, select one of the available colour bars.

You can also select the location and the alignment.

[Information bar], [Location], [Alignment]

When you want to print an information bar, select one of the available information bars.

You can also select the location and the alignment.

[Banner pages for print jobs], [Trailer pages for print jobs], [Media of banner/trailer page]

Indicate if individual sets in the job output are separated by a banner page and / or a trailer page.

[Separator sheets for print jobs], [Separator sheet after N sets], [Media of separator sheets]

Indicate if sets or a group of sets are separated by a separator sheet. N means the number of sets in a group.

[PDF XObject optimization]

Use this section to define how XObjects are processed. [Automatic]: the XObjects of a PDF/VT job are cached. [Enabled]: the XObjects of every PDF job are cached. [Disabled]: the XObjects are re-interpreted per page.

[PDF to PostScript conversion]

Indicate if you want to convert PDF to PostScript instead of only using the native PDF RIP, which is the default setting value.

[First page of print range]

When you want to print a part of the document, enter the first page number of the print range. When you do not enter the last page, the range ends at the last document page.

[Last page of the print range]

When you want to print a part of the document, enter the last page number of the print range. When you do not enter the fist page, the range begins at the first document page.

[First record of the print range]

When you want to print a part of the document of a variable data job, enter the last page number of the print range. When you do not enter the last record, the range ends at the last record.

[Last record of print range]

When you want to print a part of the document a variable data job, enter the last page number of the print range. When you do not enter the fist record, the range begins at the first record.

[Accounting ID]

Enter the accounting ID.

[Cost center]

Enter the cost centre.

[Custom]

Enter extra accounting information.

[Page numbering], [Start with page number], [Location], [Text before page number], [Text after page number]

Indicate if you want to use page numbers. The default font and the font size are pre-defined.

Indicate if and where the page numbers are printed. Enter the text that is additionally printed before or behind the page number.