This section describes what is required for printer maintenance.
Equipment
Foam Tipped Swab (3010118211)
Flush (3010106646 Flush UV 1 Liter)
Bottle-HDPE 125ml for flush (3010105433)
Isopropyl alcohol (IPA)
Cloth-Poly Wipe 10cm x 10cm (lint-free)
CAUTION
Wear gloves when contact with ink or maintenance materials is possible. Gloves should always overlap sleeves. Follow the ink related Safety Data Sheets (SDS) guidelines carefully in order to ensure maximum safety. For example use Ansell Microflex 93-260 gloves, which offer a protection against UV inks and flush up to one hour. Pollution with other chemicals can shorten the protection time against UV inks and flush.
Wear eye protection as prescribed in this document when performing a task or action in this area.
Wear protective sleeves during printhead maintenance (for example DuPont Tychem 6000 F oversleeve model PS32LA).
Perform Daily maintenance at the beginning of each work day.
|
Daily |
Procedure |
|---|---|
|
Maintain White Ink |
|
|
Clean Ink Spit Tray |
|
|
Clean Carriage Underside |
|
|
Print a nozzle check Perform automatic printhead maintenance on the printhead that has failing nozzles. |
|
|
Clean Automatic Maintenance Station |
|
Weekly |
Procedure |
|---|---|
|
AMS Printhead Maintenance |
|
|
Clean printheads using swabs |
|
|
Empty the Waste Trays |
|
Monthly |
Procedure |
|---|---|
|
Replace UV LED unit Filters |
|
|
Clean Linear Gantry Rails |
|
|
Clean UV LED unit window |
|
|
Check Coolant level |
|
Incident based, as needed |
Procedure |
|---|---|
|
Clean Horizontal Surfaces |
|
|
Remove Ink from Table |
|
|
Clean the covers around the Spit Tray |
|
Needed when indicated on the operator panel |
||
|---|---|---|
|
Bleed ink filter (CMYK) |
After 5 Bags |
|
|
Bleed ink filter (White) |
After 1 Bag |
|
|
Change Ink Filters |
After 50 liters of ink, or if pigment looks weak |
|