Turn on, awake and turn off the printer

The print module has a main power switch to turn on the print module and all optionals.

In the Settings Editor you can set timers for the energy save modes. When there is no activity during these preset periods, the system will first enter the low power mode and then the sleep mode. Then you also need to awaken the print server from sleep mode.

When enabled in the Settings Editor, the system wakes up when a job arrives in the list of scheduled jobs or when you use the control panel. (Configure sleep mode, low power mode, and shut-down mode)

The main power switch of the print module (1) and the sleep button of the control panel (2)

This topic describes how to:

• Turn on the printer

• Turn off the printer

• Awake the printer from sleep mode

• Restart the printer

Turn on the printer

1. Turn the main power switch on top of the print module into the "I" position.

   Be aware that the print system needs time to start up.

2. Press the sleep button at the right-hand side of the control panel.

Turn off the printer

IMPORTANT

Do not use the main power switch on the print module to turn off the print system. The shut-down function via the control panel automatically changes the position of the main power switch from the 'I' to the 'O' position.

1. Touch [System]  → [Setup] .

2. Touch [Shut down printer].

3. Touch [Yes].

   When the shutdown process has been completed, the control panel light is off.

Awake the printer from sleep mode

First, the printer enters the low power mode, then the printer enters sleep mode.

1. Press the sleep button at the right-hand side of the control panel.

2. Press the sleep button again to awake the system.

Restart the printer

The control panel informs you if a restart of the print system is necessary.

1. Touch [System]  → [Setup] .

2. Touch [Shut down printer].

3. Touch [Restart].

You can also restart the printer from the Settings Editor. Location: [Support]  → [Troubleshooting] .