Syntax
XPath: /JDF/ResourcePool/Layout/MarkObject/JobField/GeneralID[@IDUsage=”oce:PageNumber”]/@IDValue
Type
Integer
Syntax
XPath: /JDF/ResourcePool/Layout/MarkObject/JobField/GeneralID[@IDUsage=”oce:Prefix”]/@IDValue
Type
String
Supported range
[0..80] characters
Type
XPath: /JDF/ResourcePool/Layout/MarkObject/JobField/GeneralID[@IDUsage=”oce:Suffix”]/@IDValue
Type
String
Supported range
[0..80] characters
Syntax
Xpath: /JDF/ResourcePool//Layout/MarkObject/DeviceMark/@MarkPosition
Type
Enumeration
Supported values
|
@MarkPosition |
Description |
|---|---|
|
Top |
Top edge |
|
Bottom |
Bottom edge |
"Left" and "Right" are not supported for page numbering.
Syntax
Xpath: /JDF//ResourcePool/Layout/MarkObject/DeviceMark/@MarkJustification
Type
Enumeration
Supported values
|
@MarkJustification |
Description |
|---|---|
|
Center |
The page number is centred on the top or bottom page edge. |
|
Left |
The page number is aligned to the left. |
|
Right |
The page number is aligned to the right. |
Description
Use this setting to place the page numbers at a specified location, with a specified prefix and suffix. The page numbers start at the specified page number. All parameters must be defined under the same MarkObject.
Example
<JDF …>
<ResourcePool>
...
<Layout ID="layout_1" Class="Parameter"
Status="Available">
<MarkObject>
<JobField>
<GeneralID IDUsage="oce:PageNumber" IDValue="1"/>
</JobField>
<JobField>
<GeneralID IDUsage="oce:Prefix" IDValue="Bates"/>
</JobField>
<JobField>
<GeneralID IDUsage="oce:Suffix" IDValue="Stamping"/>
</JobField>
<DeviceMark MarkJustification="Center"
MarkPosition="Top"/>
</MarkObject>
</Layout>
...
</ResourcePool>
<ResourceLinkPool>
...
<LayoutLink rRef="layout_1" Usage="Input"/>
...
</ResourceLinkPool>
</JDF>
Remark
This setting is only supported for the PDF data path.
Syntax
XPath:
/JDF/ResourcePool/Layout/MarkObject/CutMark/@Marktype = “LowerLeftCutMark”
/JDF/ResourcePool/Layout/MarkObject/CutMark/@Marktype = “UpperLeftCutMark”
/JDF/ResourcePool/Layout/MarkObject/CutMark/@Marktype = “LowerRightCutMark”
/JDF/ResourcePool/Layout/MarkObject/CutMark/@Marktype = “UpperRightCutMark”
Description
You must always specify all four trim marks. There is no support for printing individual trim marks. The positions of the trim marks are taken from the PDF file. The trim marks will be placed on the corners of the TrimBox. If the TrimBox does not exist, the MediaBox is used.
The MarkTypes used may be printer dependent.
Example
JDF ...>
<ResourcePool>
...
<Layout ID="layout_1" Class="Parameter" Status="Available">
<MarkObject>
<CutMark MarkType =" LowerLeftCutMark "/>
<CutMark MarkType =" UpperLeftCutMark "/>
<CutMark MarkType =" LowerRightCutMark "/>
<CutMark MarkType =" UpperRightCutMark "/>
</MarkObject>
</Layout>
...
</ResourcePool>
<ResourceLinkPool>
...
<LayoutLink rRef="layout_1" Usage="Input"/>
...
</ResourceLinkPool>
</JDF>
Remark
This setting is only supported for the PDF data path.