Adjust the control panel

You can change several settings to adjust the control panel according to your needs or workflow.

Change the display language of the control panel

1. Touch [System] -> [Setup] -> [Language].

2. Select the language.

3. Touch [OK]

Adjust the warning time

The dashboard and the operator attention light warn you when an operator intervention is expected. You can change the warning time or disable the warning in advance.

Choose a warning time so that you have sufficient time to prepare media or remove prints without a print system stop. The factory default is 10 minutes.

Warning time setting

1. Touch [System] -> [Setup] -> [Warning time].

2. Touch [Warning in advance] to enable or disable the function.

3. Touch the - or + button to decrease or increase the warning time in increments of 1 minute.

   You can set a time from 1 - 60 minutes.

4. Touch [OK].

Define the display job names

Job names can be very long. You can indicate if you want to show the job name using two lines in the job list or how you want to truncate the name.

When you truncate a job name at the beginning, you can indicate how many characters are removed before the truncation. When you truncate a job name at the end, you can indicate how many characters are removed after the truncation.

Job name truncation

1. Touch [System] -> [Setup] -> [Job name truncation].

2. Indicate if you want to use the long job name.

3. Indicate how you want to shorten the job name.

4. Touch [OK].

Adjust the readability of the control panel

You can adjust the brightness and contrast of the control panel screen. Use the automatic or manual adjustment.

Control panel adjustments

1. Touch [System] -> [Setup] -> [Control panel settings].

2. Choose the automatic adjustment method or touch the + and - buttons to adjust the brightness and contrast manually.

3. Touch [OK].