This "external finisher" can be used when one wants to print to the 3rd party outlet with a bare minimum of connected DFD interface signals or print to the printers outlet without an external finisher actually connected via DFD.
|
Index |
Parameter |
Name |
Canon name Sorter/Misc |
Default values |
|---|---|---|---|---|
|
1 |
241107 |
Limit to short edge feed |
SORTEDGE |
No (0) |
|
2 |
241103 |
Document deposition (face orientation) |
DOCORI |
Face down (0) |
|
3 |
241104 |
Last sheet first |
LSFST |
No (0) |
|
4 |
241105 |
Recovery strategy |
RCVRYMOD |
Page based (3) |
|
5 |
241106 |
Header orientation |
HEADORI |
Header up (0) |
|
6 |
dfd_stop_type_after_full |
Stop type after full |
STOPTYPE |
Stop before set boundary (0) |
|
7 |
dfd_nof_sets_after_full |
Number of allowed sets after full |
NOFSETAF |
Infinite (-1) |
|
8 |
dfd_c0_sheet_exit_usage |
C0 (Sheet exit) signal usage |
C0SGNL |
Active high (1) |
|
9 |
dfd_c1_end_of_set_usage |
C1 (End of set) signal usage |
C1SGNL |
Active high (1) |
|
10 |
dfd_c2_cycle_up_usage |
C2 (Cycle up) signal usage |
C2SGNL |
Active high (1) |
|
11 |
dfd_c3_end_of_job_usage |
C3 (End of job) signal usage |
C3SGNL |
None (0) |
|
12 |
dfd_c4_large_paper_format_usage |
C4 (Large paper format) signal usage |
C4SGNL |
None (0) |
|
13 |
dfd_c5_c6_job_destination_usage |
C5/C6 (Job destination) signal usage |
C6SGNL |
None (0) |
|
14 |
dfd_c7_prod_full_handling_usage |
C7 (Productive full handling) signal usage |
C7SGNL |
None (0) |
|
15 |
dfd_s0_off_line_usage |
S0 (Offline) signal usage |
S0SGNL |
None (0) |
|
16 |
dfd_s1_faulted_usage |
S1 (Faulted) signal usage |
S1SGNL |
None (0) |
|
17 |
dfd_s2_full_usage |
S2 (Full) signal usage |
S2SGNL |
None (0) |
|
18 |
dfd_s3_sheet_delivered_usage |
S3 (Sheet delivered) signal usage |
S3SGNL |
None (0) |
|
19 |
dfd_s4_set_delivered_usage |
S4 (Set delivered) signal usage |
S4SGNL |
None (0) |
|
20 |
dfd_s5_req_opt_sheet_interval_usage |
S5 (Optional sheet interval time) signal usage |
S5SGNL |
None (0) |
|
21 |
dfd_s6_req_opt_set_interval_usage |
S6 (Optional set interval time) signal usage |
S6SGNL |
None (0) |
|
22 |
dfd_s7_req_opt_set_delay_usage |
S7 (Optional delay between sets) signal usage |
S7SGNL |
None (0) |
|
23 |
dfd_c0_sheet_exit_pulse |
C0 (Sheet exit) signal pulse-width |
C0PW |
200 ms |
|
24 |
dfd_c1_end_of_set_pulse |
C1 (End of set) signal pulse-width |
C1PW |
200 ms |
|
25 |
dfd_c3_end_of_job_pulse |
C3 (End of job) signal pulse-width |
C3PW |
200 ms |
|
26 |
dfd_c0_sheet_exit_delay |
C0 (Sheet exit) signal delay |
C0DLY |
0 ms |
|
27 |
dfd_c1_end_of_set_delay |
C1 (End of set) signal delay |
C1DLY |
0 ms |
|
28 |
dfd_c3_end_of_job_delay |
C3 (End of job) signal delay |
C3DLY |
0 ms |
|
29 |
dfd_c2_cycle_up_time |
First sheet delay after C2 (Cycle up) |
FSC2D |
0 ms |
|
30 |
dfd_c2_cycle_down_time |
C2 (Cycle down) delay after last sheet |
LSC2D |
0 ms |
|
31 |
dfd_c4_threshold_size |
C4 (Large paper format) threshold size |
C4SZ |
2500 [0.1 mm] |
|
32 |
dfd_c4_switch_delay |
C4 (Large paper format) switch delay |
C4SWDL |
0 ms |
|
33 |
dfd_c5_c6_job_destination_switch_delay |
C5/C6 (Job destination) switch delay |
C5C6JDSD |
0 ms |
|
34 |
dfd_c5_c6_bypass_delay |
C5/C6 (Bypass) delay |
C5C6JBD |
0 ms |
|
35 |
dfd_c0_min_sheet_interval |
Default minimum sheet interval time |
DFSHMIN |
0 ms |
|
36 |
dfd_c0_opt_sheet_interval |
Optional minimum sheet interval time |
OPSHMIN |
0 ms |
|
37 |
dfd_c1_min_set_interval |
Default minimum set interval time |
DFMINTIM |
0 ms |
|
38 |
dfd_c1_opt_set_interval |
Optional minimum set interval time |
OPMINTIM |
0 ms |
|
39 |
dfd_c1_min_set_gap |
Default minimum delay between sets |
DFMINSET |
0 ms |
|
40 |
dfd_c1_opt_set_gap |
Optional minimum delay between sets |
OPMINSET |
0 ms |
|
41 |
dfd_c3_min_job_gap |
Default minimum delay between jobs |
OEMSNSR |
0 ms |
|
42 |
dfd_edge_paperpath_sensor |
OEM Sensor edge selection |
OEMSNSR |
Leading edge (0) |
|
43 |
dfd_s2_prod_full_pulse_duration |
S2 (Full) maximum signal pulse duration |
- |
200 ms |
|
44 |
dfd_s2_prod_full_delay |
S2 (Full) Productive full handling delay |
- |
0 ms |
|
45 |
dfd_timeout_s3 |
S3 (Sheet delivered) time out |
TOUTS3 |
0 ms |
|
46 |
dfd_timeout_s4 |
S4 (Set delivered) time out |
TOUTS4 |
0 ms |
|
47 |
dfd_in_velocity |
Input velocity |
INVELO |
9500 [0.1 mm/s] |
|
48 |
dfd_in_pinch_position |
Position of first paper pinch after border (L2) |
INPINPOS |
650 [0.1 mm] |
|
49 |
dfd_plus_protocol |
DFD+ protocol |
PLTPROCL |
None (0) |
|
50 |
dfd_plus_serial_baudrate |
DFD+ serial baudrate |
SERBRATE |
9600 bps (6) |
|
51 |
dfd_plus_serial_parIty |
DFD+ serial parity |
SERPARI |
Odd (2) |
|
52 |
dfd_plus_serial_databits |
DFD+ serial databits |
SERDATB |
8 bits (3) |
|
53 |
dfd_plus_serial_stopbits |
DFD+ serial stopbits |
SERSTPB |
1 bit (0) |
MST table definitions